Q:we need the correct paint for our outdoor fountain....nothing too difficult please.
by|Jun 5, 2022
1 Answer
Answer This Question
A: Happy to help, Ellie! The Rust-Oleum Pool and Fountain Paint can be used on your outdoor fountain. Surfaces should be clean and sound prior to application, please be sure to refer to the directions on the label. You'll want to make sure you're applying two full coats, waiting a minimum of 16 hrs before you apply your second coat. We hope this helps! - Rust-Oleum Product Support 1
by|Jun 6, 2022
Q:Can this paint be used with bacquicil? We had a bubbling paint issue with another acrylic pool paint
by|Apr 18, 2021
1 Answer
Answer This Question
A: Rust-Oleum High Performance Acrylic Pool and Fountain Paint is designed to offer advantages over traditional solvent-based paints. For best results, allow 3 days dry time before filling outdoor pools or adding any water treating product (allow 6 days for indoor pools). Please feel free to reach out to our Product Support Team at (800) 899-1729 with any additional questions. We will be happy to help. - Rust-Oleum Product Support 4
by|Apr 19, 2021
Q:Our pool steps seem to be peeling off on the sides only, feels kinda like a vinyl coating. Can this paint be applied over that if sanded down to smooth the edges?
Will it continue to peel after applying this paint?
Do you need to clean surface before applying?
If so, what do you use to clean?
by|Apr 13, 2021
1 Answer
Answer This Question
A: Hi Amos, our Rust-Oleum Acrylic Pool and Fountain Paint may be applied to previously painted chlorinated and synthetic rubber surfaces. The loose coating should be removed and scraped to ensure any remaining paint is well adhered. The surface should be cleaned with soap and water, then thoroughly rinsed. You may apply the Pool Paint while the surface is still damp. - Rust-Oleum Product Support 2
by|Apr 15, 2021
Q:Can this be used on a fiberglass pool?
by|Jan 17, 2021
1 Answer
Answer This Question
A: Glad to help out, Morgan. Rust-Oleum Pool & Fountain Paint is not suitable for use over fiberglass. - Rust-Oleum Product Support 5
by|Jan 18, 2021
Q:Does this work on plexiglass?
by|Oct 6, 2020
1 Answer
Answer This Question
A: We appreciate your interest! Rust-Oleum Acrylic Pool and Fountain Paint is intended for use on concrete and masonry surfaces, as well as previously coated surfaces. We do not recommend it for use on plexiglass.
- Rust-Oleum Product Support 3
by|Oct 6, 2020
Q:Is this product available in just 1 gallon. Looking to paint a 4' x 4' fountain that is about 3 ft deep. Only looking to do the top concrete and side walls... 2 gallons seems to be too much.
by|Jul 6, 2020
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer. To better answer your question please contact Home Depot customer service at 800-430-3376. They will be able to assist you.
- Rust-Oleum Product Support 6
by|Jul 9, 2020
Q:Am looking for flat/matte paint in black? What is the finish of this paint?
by|Jun 14, 2020
1 Answer
Answer This Question
A: Great question, Zula! Rust-Oleum Acrylic Pool and Fountain Paint has a flat finish.
- Rust-Oleum Product Support 3
by|Jun 19, 2020
Q:Is this right product to waterproof the inside of a new glazed terrecotta urn to make a fountain?how long is warrant?
by|Jun 6, 2020
1 Answer
Answer This Question
A: Rust-Oleum Acrylic Pool and Fountain paint is not recommended for application to glazed terracotta. - Rust-Oleum Product Support 4