#1 Home Improvement Retailer

Cart

Cart

Home
Tools
Power Tools
Sanders
Orbital Sanders

Questions and Answers for Shop Series 4.3 Amp 6 in. Disk 4 in. x 36 in. Belt Sander

Internet #202791041

Model #RK7866

Store SKU #1000793315

4.3 Amp 6 in. Disk 4 in. x 36 in. Belt Sander
(59)Questions & Answers (10)
  • 1/2 HP sander has belt tension lever for easy changes
  • Stationary tool comes with manufacturer warranty of up to 2 years
  • Sanding belt offers maximum speed of up to 1,700 SFM
View Full Product Details

Questions & Answers

10Questions
caret
Q:Of all the bench top 4" belt sanders you have to sell - which one is NOT made in China?
by|Aug 5, 2022
0 Answer
Answer This Question
caret
Q:Does the miter table attach to the arm as well, and if it does, does it still tilt?
by|Oct 10, 2021
1 Answer
Answer This Question

A:  Your shop series Disc & Belt sander can be anchored to a workbench. The sanding table works independently for the disc sander.

by|Oct 12, 2021
    1 found this answer helpful
    caret
    Q:What is the dust port outside diameter?
    by|May 19, 2019
    2 Answers
    Answer This Question

    A:  The outside diameter is 2 7/16”.

    by|Oct 1, 2019

    A:  The dust port outside diameter is 2.5 inches. See photos.

    by|May 23, 2019
      caret
      Q:What is the WEIGHT of the Rockwell sander
      by|Feb 22, 2018
      2 Answers
      Answer This Question

      A:  This unit weighs 42 pounds.

      by|Nov 14, 2018

        A:  Thank you for your inquiry. The table weight is 42lbs.

        by|Nov 14, 2018
          caret
          Q:how is the sanding belt changed ?
          by|Feb 20, 2018
          2 Answers
          Answer This Question

          A:  Pull the grey lever toward you to loosen the sanding belt. Pull the belt toward you. The lower side (left side) has a tight clearance so you should move the belt a little at a time, top to bottom to top or left to right to left. (depending which position the belt is in). Put on the new belt and center it on the rollers. Close the grey lever. Turn on the unit and watch for drift of the belt. If the drift is great, shut off the unit. If it doesn't move you are set. If it moves off center, turn the yellow knob slowly to bring it back to center. That should be it.

          by|Mar 6, 2022
            2 found this answer helpful

            A:  There is a lever on the front of the machine that you will pull to the right to loosen the belt. You can then slide the belt off of the pulleys and slip on the new belt. Push the lever back to the left to tighten the new belt and then check the tracking and if it needs adjusting you turn the knob on the front of the sander to keep it tracking properly.

            by|Mar 6, 2022
            1 found this answer helpful
            caret
            Q:Can this be used to sand metal?
            by|Dec 25, 2017
            2 Answers
            Answer This Question

            A:  No, you would need a grinder.

            by|Jan 26, 2019
              1 found this answer helpful

              A:  It can sand metal if proper type of sand paper is fitted to the machine.

              by|Jun 8, 2019
                1 found this answer helpful
                caret
                Q:I don't want a low speed grinder that can only sharpen. And, I don't want a high speed that can't. I could spend more and get variable but if I'm going to spend more, why not get a belt/disc sander? That's my dilemma. I have a gift certificate that's burning a hole in my wallet! I wish they made a sander with a grinding wheel rather a disc pad. Do you think I could get high end emery cloyh types belts and discs? That may solve my problem.
                by|Jan 9, 2017
                1 Answer
                Answer This Question

                A:  Thank you for taking the time to ask additional questions on our product. We do not offer this type of cloth or disc however I researched the product and see that the belt length is 4" x 36" and the disc size if 6". This is the required size and if they can be found you can use this unit to perform the job. Thank you for your time and patience.

                by|May 4, 2023
                  caret
                  Q:I am looking for a sander to shape small woodworking projects and put bevels on knives.
                  by|Sep 5, 2016
                  1 Answer
                  Answer This Question

                  A:  Thank you for taking the time to ask additional questions on our product. I would not suggest this model for beveling of knives. This tool will provide a fine finishing edge. Thank you for your time and patience.

                  by|Aug 15, 2020
                    1 found this answer helpful
                    page 2

                    Compare Similar Items

                    current item
                    4.3 Amp 6 in. Disk 4 in. x 36 in. Belt Sander
                    (59)
                    $150.99
                    /box
                    4 in. x 36 in. Belt and 6 in. Disc Combination Sander
                    (20)
                    $131.52
                    5 Amp Corded 4 in. x 36 in. Belt and 6in. Disc Sander Combo with Cast Aluminum Worktable for Woodworking, Metalworking
                    $166.99
                    /box
                    2 in. x 42 in. Belt, 6 in. Disc Bench Finishing Machine
                    (2)
                    $279.00

                    Power Tool Features

                    No Additional Features

                    Lockout Power Switch, No Tool Belt Change

                    No Additional Features

                    No Additional Features