Q:Is there a way.to attach this to a cabinet front ?
by|Jan 9, 2021
1 Answer
Answer This Question
A: Yes, a door mount kit is available. https://www.homedepot.com/p/Rev-A-Shelf-8-in-H-x-1-5-in-W-x-2-13-in-D-Metal-Door-Mounting-Kit-for-Wire-Sink-and-Base-Units-5WB-DMKIT/311655086
by|Jan 11, 2021
Q:Will this fit a larger 13 gallon waste bin?
by|Aug 28, 2020
5 Answers
Answer This Question
A: Yes, it should fit.
by|Oct 23, 2020
A: Not likely. The smaller sized bin is designed so as to help it clear sink drain/garbage disposal plumbing and cabinet door openings.
I do use 13 gallon bags in the bin.
by|Aug 28, 2020
A: Yes, it’s a great product and very easy to install.
by|Dec 18, 2020
A: As long as the measurements of the waste can are the same and you have enough clearance below your sink bowl yes.
by|Sep 9, 2020
A: Yes, this is much larger; I use 30 gallon trash bags in it.
by|Jan 29, 2021
Q:Does this include the brackets to attach the door front as shown in the pictures? Or, can I use the ones from my existing slides?
by|Jul 21, 2020
2 Answers
Answer This Question
A: When I bought mine, it did not come with the brackets.
by|Jul 27, 2020
A: Optional Door mount kit 5WB-DMKIT is sold separately. Looking at your picture and comparing it to that shown on the HD site it does appear that your existing brackets could work.
by|Jul 22, 2020
Q:How much clearance does it have from the bottom of the cupboard? I have a lip on my cupboard that is about half an inch.
by|Jul 8, 2020
2 Answers
Answer This Question
A: 3/4" from inside cupboard.
by|Jul 11, 2020
A: There are two sliding rails that extend as you pull the basket out. The first one that extends has about 11/16 inch clearance to the mounting surface (bottom of the cupboard.) The second one extends after the first one has fully extended, and it has almost exactly 1/2 inch clearance to the mounting surface. (See the attached photo.) This one may or may not interfere with the lip on your cupboard depending on exactly how close to 1/2 inch tall it is. If it does hit/stick on the lip you will not be able to fully pull out the basket.
You could consider slightly shimming the unit above the bottom of your cupboard, if necessary.
by|Jul 11, 2020
Q:The last two pics have brackets which attach to cabinets
by|Jun 19, 2020
2 Answers
Answer This Question
A: Yes you will want to screw the wire rack down onto your floor of your cupboard. Anyone should be able to install this item.
by|Sep 7, 2020
A: good heavy chrome, smooth operation.
by|Sep 7, 2020
Q:Does this have the soft close feature?
by|Feb 12, 2019
6 Answers
Answer This Question
A: No, it does not have soft close.
by|Feb 12, 2019
A: No, but it is very smooth when it closes. I am very happy with it.
by|Jul 20, 2020
1 found this answer helpful
A: No it did not have a soft close feature, I didn't feel this was necessary. It's very smooth on it's own.
by|May 6, 2020
A: This unit and series does not.
by|Feb 12, 2019
A: No
by|Feb 11, 2020
A: no. I did not purchase this item for a soft close. I figured I could close it softly on my own.
by|May 7, 2020
Q:Is it screwed into the bottom of the cabinet or the side? I need a bottom mount
by|Dec 14, 2018
5 Answers
Answer This Question
A: Bottom
by|Jul 14, 2020
3 found this answer helpful
A: It attaches to the bottom of the cabinet opening.
by|Apr 20, 2020
2 found this answer helpful
A: Hi .. it is screwed to the bottom of the cabinets. No need for a bottom mount, unless you just want to add one, but not necessary.
by|Oct 27, 2019
1 found this answer helpful
A: Bottom.
by|Apr 20, 2020
2 found this answer helpful
A: Bottom mount. 15 minute job.
by|Apr 20, 2020
2 found this answer helpful
Q:I have this product but I need a new kit how can I make sure I get the one that goes with this product? I just need the
by|Nov 4, 2018
4 Answers
Answer This Question
A: Looks like you need a 53WC-1550SCDM-117. this is a single 50QRT unit with slide assembly and door mount kit included.
by|Nov 5, 2018
A: If you check the Rev-A-Shelf website it lists compatable parts. The door attachment I chose specifically listed this and several other kits for compatibility.
by|May 6, 2020
A: you need to ask the Home Depot associates for that information, that is what I had to do,
I am not a handy person or a contractor, I was told what to get and went and picked it up.
by|Nov 4, 2018
A: Hi Catherine
I have this product and love it. What is it that you need and maybe I can help.