A: I do not believe so, this is not designed for that type of work.
A: I would think it would cut brick r tile with the appropriate cutting wheel...but i have never done that.....it will grind metal with the appropriate wheel......i would buy a masonry saw for bricks just for the safety side of it.
A: The grinder can be used to cut or score the concrete block using a diamond blade for dry cutting, but also use at least a dust mask and don't cut near anything that is difficult to clean dust out of.
A: It is not recommended to use cutting discs with this grinder.
A: yes, you can cut brick and masonary with the correct cutting wheel, but this is not a heavy-duty unit and you'll probably burn it out pretty quickly like I did.
A: Thank you for contacting RIDGID. We are sorry to hear you are having problems with your grinder. We do not recommend our customers attempt repairs. Please contact your nearest RIDGID authorized service provider to have the grinder checked and properly serviced. To find a service center, please use this link: https://www.ridgid.com/us/en/service-centers-repair
A: no, thatll void your warranty.
A: No not a good idea. That will void your warranty. It is best to let your service center fix it
A: Exchange or return, if you open, it Will void the warranty.
A: I wouldn't. If you continue to have this problem I would return it and let the factory deal with it
A: I would take to Home Depot for possible service. If registered has lifetime warranty which would be voided if you take it apart
A: We use 6" cut off wheels all the time. They work well. Just buy a high quality wheel.
A: Thank you for contacting RIDGID. Issues related to Improper mounting-fitting, RPM ratings, as well as the type of applications type 1 discs are used for, are the reasons they are not recommended for use on RIDGID angle grinders.
A: yes, if you use a cutting dist
A: yes I use it all the time to cut metal, you'll just need to purchase a 4&1/2 cut off wheel as this only comes with a grinding wheel. then you need to flip the bottom nut that holds so that the flat side is touching the cut off wheel instead of the raised side like it would be for a grinding wheel.
A: BR, I have used mine to cut glass, ceramic, marble tiles along with all types of metals and concrete blocks. Just make sure you use the proper cutting wheels.
A: Mine burned out after ten(10) minutes of use. No need for a warranty when the quality is that low. I just returned it for a full refund and purchased a different brand.
A: Thank you for your recent inquiry on Homedepot.com. The RIDGID® 8-Amp 4-1/2 in. Angle Grinder's lifetime service agreement covers all worn parts in properly maintained tools. This includes normal wear items such as brushes, chucks, motors, switches, gears and even cordless batteries in your qualifying RIDGID® Brand hand held and stationary power tools. We appreciate your business and look forward to serving you in the future. Thank you for shopping with The Home Depot.
A: Yes
A: Thank you for your interest in RIDGID. The RIDGID R1006 grinder has an eight foot power cord. Regards, RIDGID
A: The length of the cord is 8 ft.
A: The cord is 8 Foot
A: 5/8 if the dist has an insert, 7/8 if it does not
A: The grinder uses 5/8 arbor size.
A: Thank you for your interest in RIDGID. The RIDGID R1006 angle grinder has a standard 5/8 in. X 11 UNC spindle. Regards, RIDGID
A: For only 8 amps it runs like a horse. The adjustable guard is nice and moves to stay out of the way. I don't have to remove like the others to get into tight spots. Will recommend to all.
A: I was told by the store employee at the west Albuquerque store that the rep told him a new model is coming out in the next few weeks
A: Thank you for your interest in RIDGID. This will remain online only. Regards, RIDGID
A: sure why not
A: yes, but i recommend buying the v shaped grinding wheel .
A: Thank you for your interest in RIDGID. We are not sure what exactly gecoat cracks on boat decking are, but the RIDGID R1006 grinder is designed for use in the following recommended applications only: - Grinding metals - Sanding wood or metal surfaces with an abrasive mop disc. (Sold separately) Regards, RIDGID
A: yes
A: Yes, this grinder will work for grinding gel-coat on your boat but you will need a different grinding pad. The grinding pad that comes with this grinder will clog fairly quick. You will probably need to purchase a pad for grinding wood because it will throw the grinding dust off of the pad instead of clogging it up. I am a boat builder with 28yrs. of building and repairing boats and I have used the small grinders in repairing boats several times because they will get into areas that larger grinders can't reach.
A: Take in the Ridgid Power tool with all the componants it came with. If you got a combo pack, bring in the tools, charger and batteries. Take them to the tool rental area, or pro desk at most Home Depots and they will check them over, fix them or replace them. MAKE SURE to fill out your warranty on Ridgid's website after buying the tool. KEEP your receipt. Easy way not to lose it is to get an e-mail receipt at check out. Ridgid will take care of you.
A: Thank you for your interest in RIDGID! You would take the items to a local repair center. If there is not one close by you would mail the items but are responsible for all shipping charges. You can take the items to any Home Depot store. If there is a tool rental you can make minor repairs, if not they will ship to their RLC repair center. If there is not a tool rental center, the service desk will ship to their RLC repair center. If you live in Canada, you would take the items to a local repair center. If there is not one close by you would mail the items but are responsible for all shipping charges. Regards, RIDGID
A: Thank you for your recent inquiry with The Home Depot. I would advise you to refer to the warranty PDF, click to access the link: http://www.homedepot.com/catalog/pdfImages/20/2079e286-2778-4e3c-be21-9ec151ffa74f.pdf. It explains the procedure as: How to Obtain Service The Lifetime Service Agreement (if accepted), commences after the expiration of the standard RIDGID® 3 year Limited Warranty. To obtain service for this RIDGID tool on either the 3-year limited warranty, the Lifetime Service Agreement, or the recon limited warranty, you must bring the equipment, to an authorized RIDGID service center. You may obtain the location of the authorized service center nearest you by logging on to the RIDGID website at www.ridgid.com. When requesting service under the Lifetime Service Agreement, you must present your Lifetime Service Agreement Identification Number and proper personal identification (a valid driver’s license, passport, or military I.D. or a valid Social Security card with photo ID). For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot.
A: go to RIDGID.COM ....register product....an follow the instruction from there....most likely you will end up having to mail them a copy of the receipt, and the UPC code off the box ...if you have to mail it to them....best to send the letter to them "Certified"
current item | |||
Cordless/Corded | |||
---|---|---|---|
Corded | Cordless | Corded | Corded |
Wheel Diameter (in.) | |||
4.5 in | 4-1/2 in | 4.5 in | 4.5 in |
Power Tool Features | |||
Spindle Lock | Adjustable Handle Position, Blade Guard System, Cushioned Grip, Lockout Power Switch, Side Handle | Spindle Lock | Spindle Lock |
Amperage (A) | |||
8 A | 0.0 A | 7.5 A | 11 |
Voltage (V) | |||
18 V |
Explore More on homedepot.com
How can we help?