Questions and Answers for Prime-Line 1/4 in., Plastic, Clear Locking Shelf Pegs (6-pack)

A:  Thank you for your inquiry regarding this item from Prime-Line Products. The shelf should be lowered from the top down onto the shelf support tab sticking out until the top locking edge seats itself.

A:  Yes.

A:  I turn them left then right to loosen and then pull straight out

A:  Thank you for your inquiry regarding this item from Prime-Line Products. Use your own discretion. The locking clip needs to have a flat blade screwdriver get under the locking tabs to release the shelf. Then you pull back on the shelf to take it completely out.

A:  Thank you for your inquiry regarding this item from Prime-Line Products. No, 3/8" is larger than 1/4" peg.

A:  Push the top part in to release the shelf (shelf will lift up), then pull the plastic tab straight out.

A:  Remove the shelf then remove the shelf pins. If there are no pre-drilled holes too change the shelf height, drill new holes where you want then re-install the shelf pins, then slide in the shelf boards.

A:  Thank you for your inquiry regarding this item from Prime-Line Products. Use a flat blade screw driver to push down on the tab locking shelf. The use the flat blade to push under tab while lifting up on the shelf to free it. You can then pull out the clip.

A:  Just pull it out slowly with a flat head screw driver it works every time for me thanks.

A:  They have trays of different sizes at the store.

A:  Thank you for your inquiry regarding this item from Prime-Line Products. Yes there are larger shelf sizes available. You can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at CustomerService-PLP@primeline.net.

A:  Easy installation

A:  Thank you for your inquiry regarding this item from Prime-Line Products.There are no cross references for this manufacturer.This peg is 1/4". You may wish to measure the pin on your original of make a comparison.

A:  Thank you for your inquiry regarding this item from Prime-Line Products. There are pending order that are with Prime-Line. There is not an exact date that can be given since there are different warehouses throughout the USA that Home Depot uses.

A:  Thank you for your inquiry regarding this item from Prime-Line Products. Prime-Line does not have this information. You would need to measure the diameter of the holes in your cabinet to see if the 1/4" diameter of the peg will fit. You can contact the manufacturer directly with your questions regarding this item, or any other product manufactured by Prime-Line Products by calling their toll free number at (877) 649-9740, or by contacting them by email at info@primeline.net.

A:  do you have 3/4" available you used to sell Kraft-maid cabinets in the 1999 and that is what was in our cabinets?