#1 Home Improvement Retailer

Cart

Cart

Home
Outdoors
Outdoor Power Equipment
Snow Removal Equipment
Snow Blowers
Gas Snow Blowers

Questions and Answers for Poulan PRO PR305ES 30 in. 2-Stage Electric Start Snow Blower with Power Steering

Internet #205350431

Model #961920080

PR305ES 30 in. 2-Stage Electric Start Snow Blower with Power Steering
(2)Questions & Answers (2)
View Full Product Details

Questions & Answers

2Questions
caret
Q:I have a smaller snow thrower that accepts only TruFuel, which can be quite expensive after a while and using regular unleaded fuel causes damage to the carburetor. I don't want to have to spend that kind of money on a small can of TruFuel for a heavy duty snow thrower like this one. Does the PR305ES take regular unleaded or is TruFuel required? Thanks.
by|Jan 24, 2016
1 Answer
Answer This Question

A:  Regular unleaded gasoline with a minimum 87 octane rating is satisfactory for the snow blower.

by|May 3, 2023
    1 found this answer helpful
    caret
    Q:We have the snowblower for about one year and is not working. It was working till 2 days ago the last time we used it and today the engine is working, the gear is working but the snow trower is not working.
    by|Feb 3, 2015
    2 Answers
    Answer This Question

    A:  Hi Marija, I'm Travis from The Home Depot. Thanks for visiting our site. I'm sorry to hear that your snow thrower has topped working. I assume from your statement that the engine is operating, but the auger is not. If there were an obstruction that is preventing the auger from turning, it seems to me that the engine would bog down when the auger was engaged. If there is no change in the engine speed when the auger drive is initiated, the belt might be dislocated. The auger is belt driven and the belt may have broken or might have come off of its pulley. Refer to the owner's manual on page 15 for instructions to service the belt. Copy and paste this address for the manual: http://www.homedepot.com/catalog/pdfImages/f8/f8232544-4a9f-4d81-8105-5b3a49fc19c4.pdf I hope that this information helps you to get your machine up and running. Thank you for asking, -Travis

    by|May 3, 2023

    A:  Did you check the auger belt?

    by|May 3, 2023