#1 Home Improvement Retailer

Questions and Answers for Pittsburgh Corning 28 in. x 18 in. x 3 in. GuardWise Vented Delphi Pattern Glass Block Window

Internet #203519258

Model #V2818DP

Questions & Answers

6Questions
caret
Q:For the 30x22 window where does the vent fall?
by|Mar 23, 2016
1 Answer
Answer This Question

A:  There are three courses of blocks in the 30x22" window. There is a 6" high course at the top and the two bottom courses are 8" high blocks. The vent is centered in the middle course with a 6x8" block on each side of an 18x8" vent.

by|May 3, 2023
    caret
    Q:does the vent have a screen?
    by|Feb 13, 2016
    2 Answers
    Answer This Question

    A:  This vent has a screen.

    by|May 3, 2023

      A:  Yes. The vent has a screen on the exterior.

      by|May 3, 2023
        caret
        Q:What is the size, location, and orientation of the operable portion of a 24 inch wide x 48 inch high glass block window?
        by|Nov 29, 2015
        1 Answer
        Answer This Question

        A:  A 24x48" Vented GuardWise window (from bottom to top) will have three courses of 8x8" blocks three blocks wide. The fourth course will be a 4x8" block, a 16x8" vent and another 4x8" block. The fifth and sixth course will be three 8x8" blocks.

        by|May 3, 2023
          caret
          Q:What is the actual size of this window?
          by|Sep 10, 2015
          1 Answer
          Answer This Question

          A:  Yes. 16x28 is ok for your rough opening. The actual size of a 28" wide by 16" high window is 27" x15-1/2." Note: if your window is 16wide by 28 high, you will want to order a 16x28 GuardWise window. Not a 28x16. The width is listed first.

          by|May 3, 2023
            1 found this answer helpful
            caret
            Q:From the looks of this picture, how can that be 28 x 32?
            by|Oct 31, 2014
            1 Answer
            Answer This Question

            A:  The picture shown on-line is for illustration purposes only. A 28" wide by 32" high window would have four courses of 6x8" - 8x8" - 8x8" - 6x8" blocks in each course.

            by|May 3, 2023
              1 found this answer helpful
              caret
              Q:Can these be stacked?
              by|Jun 25, 2013
              1 Answer
              Answer This Question

              A:  Yes, you can use two windows to fill your opening. To do this, you will run a double bead of the Pittsburgh Corning Glass Block Sealant along the first window, install a ThinLine Track Spacer (120610) onto the sealant, run another double bead of sealant along the spacer and then install the second window. Allow the sealant to cure for 24 hours and then run a bead of the sealant along the joint on the interior and exterior.

              by|May 2, 2023