Questions and Answers for Phillips II Plus #9 2 in. Phillips-Square Flat-Head Wood Deck Screws (1 lb.-Pack)

A:  Yes! It is excellent. This is a 1/2-thread screw for attaching 2x lumber to a post,etc.. It penetrates the first 2x; slips on it (because there is no thread, and then screws into the second lumber which pulls the 2x up snug. Use 3 inch for 2x to 2x con,

A:  Made in Taiwan.

A:  These are 1/2-thread FRAMING screws. Use to build the deck frame. Deck screws have 3/4 of the screw with thread or a 1/4 upper reversed thread to lock down a deck board. These WILL squeak if used on deck boards! Ceramic coating lasts years.

A:  The screws and bit are made of extremely soft material. Good luck if you're using them on hardwood. They shred.

A:  Yes, these screws are hardened. You are more apt to break the enclosed driver bit than the screw. In fact, I don't recall ever breaking one of these screws.

A:  There are 500, #9 2in deck screws come in a 5lb box

A:  Approximately 500, #9 2in deck screws come in a 5lb box