Questions and Answers for PRIVATE BRAND UNBRANDED Farmhouse Apron Front Fireclay 30 in. Single Bowl Kitchen Sink in White

A:  The interior measurement of the sink is 10" D x 27.37" L x 15.5" W.

A:  Left to right, the interior of this sink is about 27 3/8" Front to back, the interior of this sink is about 15 1/2" Keep in mind that a fireclay sink can vary slightly.

A:  27 5/8” width 16” length 8 5/8” depth

A:  15 3/4" x 27 1/2"

A:  Protective rack that protects the porcelain from chipping in case a hard object drops in the sink.

A:  8 1/2"

A:  The basin depth is 9 inches for this sink.

A:  It is 9” from the top to the inside bottom.

A:  8 3/4" at edge near drain hole

A:  I'll guess, because I have a guest in my guesthouse where the sink is and would not invade his privacy - even for you! :) I LOVE this sink - it is such a quality product. So, my guess is about 8 inches - its uniqueness is in the width and length and apron front, etc. - but the depth as I recall is pretty standard. Sorry I can't go measure for you. You will love it!

A:  Good morning, The easiest way to go about getting a stainless grid for the base would be to take a measurement of the inside base of the sink (length and width). Once you have the dimensions, google the or search the HD website for the grid that would fit your measurements. Hope this helped

A:  Barclay Wire Grid for FS30 Sink, Stainless Steel, Electroplated Model Number: FS30_WIRE_GRID I had to order it from a different store.

A:  We had this sink and a disposal! So I know it's possible!

A:  let me guess, the drain hole is too close to the cabinet/framing that holds the sink and won't allow a disposal to fit. Buyer beware has never been more true than today.

A:  It accommodates my disposal no problem.

A:  We have this sink in our kitchen, and it does accommodate a garbage disposal. It wouldn't accommodate our old disposal due to sizing underneath the sink, but the plumber simply sold us a new disposal (reasonably priced) and it fit fine. Works great.

A:  Our contractor had no problem installing a garbage disposal with the sink.

A:  It does accommodate a disposal because we have one installed in ours and it was also purchased from Home Depot. It’s the insinkarator, evolution select plus

A:  So there is a lot to that question. First off you CAN do anything you want with the correct supporting equipment. That being said this sink was not meant to be exposed from all four corners. The back side of the sink is not finished like the sides and front. However, if you were able to drop the counter a considerable amount, paint he back to match the sides, get a larger fauscet to come over the edge of the raised sink, and be willing to side mount the controls for the faucet it could work. Please remember when you take items outside of their original intended purpose that you will run into issues that can be resolved however they take some thought and creative engineering. Good luck in your project!

A:  The drain diameter is 3.5 inches. and it is 6-7/8 inches from the edge.

A:  It is stamped made in UAE..