Questions and Answers for Pavestone RumbleStone Square 7 in. x 7 in. x 1.75 in. Cafe Concrete Paver

A:  Yes, but be sure to prepare the base properly to support driveway use.

A:  Yes. You can buy the stones individually. The 7x7 inch stones are around $1.70 each at my local HD. I have purchased many this way.

A:  YOU will need about 45 of this for 10 by 12 area.

A:  We recommend a diamond blade on a saw if at all possible but you can you a chisel and hammer if need be. Thank you for your inquiry!

A:  Use a brick set chisel and hammer to score both sides before hitting sharply on the scored line.

A:  Calculate it as a full circle (3.14 x radius squared) then divide by 2. Thank you for your inquiry!

A:  JustMe, 10 X 20 = 200 sq ft or 28,800 sq in. These stones are 49 sq in. 28,800 / 49 = 587.75. So approximately 588 pavers to cover a 10 x 20 area. However I would recommend using different sizes Rumble stones for a better pattern.

A:  You'll need 618 pcs to cover that area including waste. Thank you for your inquiry!

A:  You will need 98 blocks that will give you just over an 8 x4 ft. By a few inches both ways..

A:  You will need 84 pieces and will need to cut 1 piece each of the 6 rows for fit. Alternate alignment pattern each row.

A:  no- you need to use the large blocks 7x10.5x3.5

A:  You'll need 371pcs for that project. The pro desk can usually refer you to a contractor that they have a relationship with as well. Good luck with your project and thank you for your inquiry!

A:  This product is a little too thin for parking a vehicle on it.