Questions and Answers for Paslode 2 in. x 0.113-Gauge 30-Degree Galvanized Ring Shank Paper Tape Framing Nails (2,000 per Box)

A:  Yes 

A:  Hi Anthony, our Paslode 30 degree galvanized ring shank paper tape framing nails work in a Milwaukee 30 degree nailer. Have a great day!

A:  Absolutely, put two full boxes through mine last month.

A:  Yes, precisely the ones I use with my M18 30 degree.

A:  Yes, it is possible to use a 30-degree version of nails in a 34-degree nailer. The magazines of most of the 34-degree nailers are designed in such a way that they can receive nails varying from 30 to 34 degrees of collation angle.

A:  These are 10d nails but you can’t use them for strapping. It takes specific spacing of nail strips. Simpson offers them but I have not used them. I have always used hot dipped Galvis and hand nailed straps and joist hangers.

A:  Hi AlexG, 10d nails are 3 inches long. These are 2 3/8 inches long, so they are 5/8" shorter than 10d nails. Thank you!

A:  Yes - these nails can be used in any cordless or pneumatic 30° - 34° framing nailer.

A:  if it is 30 degrees ,that is what these nails are.

A:  Yes. As long as its the 30 degree nailer. They work well in my Dewalt framing nailer. 

A:  Hello, thanks for reaching out! Yes, Paslode 3-1/4 in. x 0.131-Gauge 30-Degree Galvanized Smooth Shank Paper Tape Framing Nails (2,000 per Box) can be used in any 30 degree paper tape framing nailer that accepts 3-1/4 in. x 0.131-Gauge nails. Please consult the DeWalt manual or website to confirm that your DeWalt nailer will accept this size. Thank you!

A:  Hi Parker, thanks for your questions. These are wood framing nails designed for wood-to-wood fastening and not intended for use in concrete. Thank you!

A:  No

A:  Hello! Thanks for reaching out. If these nails are the right gauge and size for your application, no reason they cannot be used. We also carry HDG 0 Degree Coil Siding Nails, which you can use with the Duo-Fast DF225C Pneumatic 0 Degree Coil Siding Nailer which is specifically for Siding. Wish you well on the work you need to do!

A:  It’s tons of different sidings, have to be a lot more specific.

A:  No, the diameter is too large and they will split the siding. Mike

A:  yes

A:  Hello. I recommend looking at the range of nail sizes that your tool will accept. The Paslode 2 in. x 0.113 Round Drive 30-Degree Steel Galvanized Ring Shank Paper Tape Framing Nails will work in any framing nailer that accepts 30 degree collated, paper tape nails of this size ( 2 in. x 0.113). Thank you!

A:  Yes

A:  Hello, Fencing usually calls for a small gauge nail (0.099”) but as long as you are using 30 degree paper tape framing nails of size range 2"-3.5" length in diameters 0.113, 0.120 or 0.131 then you can use this tool. Thanks!

A:  Sure can! As long as you have the gun to shoot them!

A:  Ring shank means there are rings or grooves on the nail to lessen the chance of it backing out. 

A:  Hello, Ring Shank means there is an annular (circular) deformation along the shank, typically near the point, which can increase the tensile withdrawal strength - this makes it harder for the nail to pull out. Thank you!