Questions and Answers for Palruf 24 in. Horizontal Plastic Roof Closure Strips (6-Pack)

A:  Yes

A:  Hello, Please refer to the installation guide for a complete how-to guide on proper installation of your Palruf panels. The only accessories needed are Palruf Flashings, vertical and horizontal closure strips, along with EPD washered fasteners to complete your project.

A:  Hello, Please use woodtite screws for wooden frames and metaltite for metal frames.

A:  We always recommend crown fastening of the panels rather than valley fastening. In order to do this properly a closure strip should be utilized and is required for warranty purposes.

A:  The closures are typically held in place by the fasteners which pass through both the panel and the closure (they can also be tacked down to the framing to hold them in place if needed while installing the panels). We typically do not recommend painting our panels but if you wish to do so choose a paint formulated to work with pvc and follow the paint manufacturers instructions. Keep in mind that painting a PVC panel can adversely affect the panel if it causes significant heat to build up.

A:  Not that I can see on the site. However, since they will be covered by the plastic sheets, a $5.00 can of white spray paint will work pretty easily.

A:  Yes. 6 pieces, each of which is 24 inches in length. 

A:  The plastic spacer are more true to size then the wood spacers and they will not rot.