Questions and Answers for Owens Corning R-19 Kraft Faced Fiberglass Insulation Sono Batt 24 in. x 48 in. (10-Bags)

A:  Hello Randy, please contact your local Home Depot store for product purchase options, pricing, and availability. Thank you for your inquiry!

A:  5 Out of 10 bags were used for my She-Shed 20' X 12'

A:  Hi Jake, there will be 16 pieces per bag, covering 122.67 square feet. Thank you for your inquiry!

A:  Yes. Place the insulation on a piece of scrap plywood or board to protect your floor Using a straightedge, compress the insulation and cut with a utility knife. Depending on depth of insulation it may take a few passes with knife to complete cut. Place the insulation in the space and staple. Wear gloves, some people can be sensitive to the fiberglass. Additionally you should wear a mask and eye protection.

A:  Compressing the edges of the insulation 1 " should not be a problem.

A:  Slightly over 118 square feet which will insulate approximately 4 sheets of 4 x 8 drywall.

A:  Hello Rafa, each package of Owens Corning R-19 Kraft Faced Batts covers 118.83 sq ft. Thank you for your inquiry!

A:  each piece was 24" by 93" just as I needed.

A:  Hi Matt, if the lights are rated for insulation contact (IC) the batts may be in contact with them. Typical temperatures of radiant heat systems are well within range for insulation contact and will have no affect on fiberglass insulation batts. Thank you for your inquiry!

A:  This model is FSK.

A:  The Flame Spread Insulation undergoes ASTM E84 as a test of the product's surface burning characteristics. The nature of this testing is available online. If you have any questions about this or any other technical aspects of the insulation, feel free to call 1-800-GET-PINK to speak with a product specialist. You may also contact a representative at your local Home Depot ProDesk and they will be happy to assist you. Or you can call 1-800-HOME-DEPOT (1-800-466-3337) and someone will be happy to assist you as well. Thank you for your inquiry!

A:  Product pricing in store and online is set by The Home Depot. It may be best to discuss this with a store associate. Please feel free to contact a representative at your local Home Depot ProDesk and they will be happy to assist you. Or you can call 1-800-HOME-DEPOT (1-800-466-3337) and a someone will be happy to assist you as well. Thank you for your inquiry!

A:  Check product description. One may actually be unfaced, a different thickness or width. If item is identical check at pro desk there may be a misprint.

A:  According to the Home Depot website, under the Product Overview for the R19 Kraft Faced Sono Batt 24" x 48" •Dimensions: 6-1/4 in. x 24 in. x 48 in. 16 pieces (128 sq. ft. / bag). Thank you for your inquiry and good luck with your project!

A:  I would recommend at least an R 30 insulation for that situation

A:  I used R21 in the 2x6 rafters. It's thinner than R19 and it has a higher insulating value.

A:  Depends, do you intend to heat it, is it attached, these are all relevant to your needs. If attached and heated, go for the max, or R-19.

A:  You don't need any higher r-value in the ceiling of your garage than you have in the garage door. Any more would be wasted. Unless there was a living space above the garage.

A:  R19 is made to fit within a 2x6 cavity. If you have soffit and ridge ventilation, I would recommend you use Raft-R-Mate baffels in order to maintain the air flow behind the batt insulation. Using R19 in a 2x6 cavity with baffels, would give you an approximate R-value of R18 with compression. I recommend checking with local code in order to determine the recommended R-value and vapor barrier requirements for your area prior to purchasing any insulation. Code will dictate these requirements. Thank you for your inquiry, and Happy Holidays!