A: Thank you for the question. OSI QUAD Sealant can be applied between 20°F (-7°C) and 100°F (38°C). For easier extrusion of sealant at lower temperatures, store cartridge at room temperature at least 24 hours prior to use.
by|Jan 12, 2024
2 found this answer helpful
Q:Hour long before painting over
by|Nov 4, 2023
1 Answer
Answer This Question
A: Thank you for your question. OSI QUAD Sealant can be painted once fully cured, typically in 7-14 days, depending on temperature, humidity, and depth of the sealant applied. Latex paint is recommended.
by|Dec 29, 2023
1 found this answer helpful
Q:CAN THIS PRODUCT BE USED FOR INTERIOR PROJECTS
by|Oct 31, 2023
1 Answer
Answer This Question
A: Thank you for your question. OSI Quad Sealant is a solvent-based product and is not recommended for interior use in occupied living areas, for safety reasons. You may visit www.ositough.com for more information on OSI QUAD Sealant.
by|Nov 3, 2023
Q:CAN THIS PRODUCT BE USED FOR INTERIOR PROJECTS
by|Oct 31, 2023
1 Answer
Answer This Question
A: Thank you for your question. OSI Quad Sealant is a solvent-based product and is not recommended for interior use in occupied living areas, for safety reasons. You may visit www.ositough.com for more information on OSI QUAD Sealant.
by|Dec 29, 2023
1 found this answer helpful
Q:Can this sealant be painted?
by|Oct 10, 2023
1 Answer
Answer This Question
A: Thank you for the question. OSI QUAD Sealant is paintable with latex paint or primer once it is fully cured. The curing time is 7-14 days and is dependent on temperature, humidity, and the depth of the sealant applied.
by|Oct 10, 2023
Q:How do you clean up
by|Oct 8, 2023
1 Answer
Answer This Question
A: Thank you for the question. Uncured sealant residue may be cleaned up immediately with mineral spirits or paint thinner, following the solvent manufacturer's precautions. Cured sealant must be carefully cut away with a sharp-edged tool.
by|Nov 15, 2023
Q:Can you use the product then after not dries can you use rustoleum spar oil based exterior polyurethane sealers on it?
by|Sep 22, 2023
1 Answer
Answer This Question
A: Thank you for your question. OSI QUAD should not be painted until fully cured. Full cure may take 7-14 days, or longer, depending on ambient conditions and volume of sealant used. Latex paint is recommended, but if using oil based/alkyd paint, a latex primer should be used first. It is the responsibility of the user to conduct on-site testing to determine compatibility and suitable results. Keep in mind, paints are more rigid than sealants and may crack, wrinkle or lose adhesion during sealant movement.
by|Sep 25, 2023
Q:Is this caulk waterproof
by|Sep 16, 2023
1 Answer
Answer This Question
A: Thank you for the question. OSI QUAD is water resistant but not waterproof. This product is not recommended for use in prolonged underwater applications or permanent water immersion.
by|Dec 29, 2023
1 found this answer helpful
Q:Is this construction adhesive or caulk?
by|Sep 8, 2023
1 Answer
Answer This Question
A: Thank you for the question. OSI QUAD is a sealant/caulk designed for exterior window, door, and siding applications in residential and low-rise building construction. For more information on our product, please visit www.ositough.com and review the product's Technical Data Sheet.
by|Sep 12, 2023
Q:Can this be used to seal around a newly installed wall sconce on a brick wall?
by|Sep 3, 2023
1 Answer
Answer This Question
A: Thank you for the question. Yes, OSI QUAD can be used for the application described. Keep in mind this product is for exterior sealing applications only.