Questions and Answers for Makita 3 Amp Top Handle Jig Saw with Case

A:  Thank you for your question on the 4329K jig saw. For plastic countertops we recommend a plastic jig saw blade, please refer to the following link www.makitatools.com/products/accessories/Cutting-Blades/jig-saw-blades# to check our blade options. If you have any questions, please call the Makita Call Center during business hours at (800)4-MAKITA, they’re based in Flowery Branch, GA, and are ready to help.

A:  Thank you for your question. For the model 4329K Jig Saw Blade, we recommend you the T Shank blade part number 792529-7. For more information, please refer to the following website www.makitatools.com/products/details/792529-7.

A:  Thank you for your question on the 4329K Jig saw. The Die-cast Aluminum base adjusts up to 45° right or left.

A:  Yes, with the correct blade. Though a Sawmill may work better especially for pipe.

A:  Thank you for your question. The 4329K is a versatile saw that can cut through many materials, when used with the correct blade for the application.

A:  Sawzall not sawmill!

A:  Thank you for your question. The 4329K Top Handle Jig Saw includes the plastic case as shown in the image carousel.

A:  Hard plastic with secure latches that snap.

A:  Yes... it depends on the radius of the cut and the cutting blade you are using. For tight turns, you may need to cut slightly away from your cut line, back up, and then cut tighter to the curve. This will give the back edge of the blade space to be able to turn.

A:  The answer is yes, but the material you are cutting, the type of blade you are using and your technique are very important factors for curved cuts to be "easy."

A:  I have had no problems making curved cuts. You need to make sure you have correct saw blade for material. Always hold saw firmly against the material. There is a limit to radius of curve you can make in one continuous cut.

A:  Thank you for your question, but we will require more specific information in order to provide an answer. Call the Makita Call Center during business hours at (800)4-MAKITA, they’re based in Buford, GA and are ready to help.

A:  this jigsaw cuts like butter! When dealing with tight radiuses don't forget you have to make kerf cuts before you try to cut them. (Look up some videos online to see what I'm talking about) If you do the kerf cuts it will make your life easier Also, don't forget about the different cut setting this tool has (read the manual)

A:  This jig saw uses tang shank blades.

A:  Thank you for your question. The 4329K Top Handle Jig Saw uses blades with a "T" shank.

A:  The first makMak jigdaw I own.very nice took and I absolutely stick with makMak.

A:  Japanese

A:  Thank you for your question. The 4329K Top Handle Jig Saw is made in China. Please be advised that all of the Makita corporation's manufacturing centers around the world are held to the same Quality Criteria regardless of location.