#1 Home Improvement Retailer

Questions and Answers for MUSTEE 24 in. x 24 in. x 10 in. Service Mop Basin for 3 in. DWV in White

Internet #202041495

Model #63M

  • One-piece sink with drain seal to fit a PVC, ABS or iron pipe
  • Sturdy yet lightweight fiberglass allows for easy installation
  • Removable steel strainer strains residues, prevents pipe blockage

Questions & Answers

11Questions
caret
Q:What drain is used with this sink
by|Sep 12, 2023
1 Answer
Answer This Question

A:  The mop basin has a molded-in drain with a drain seal for 3" PVC ABS and Iron. Go to www.mustee.com and look up the instruction manual.

by|Sep 26, 2023
    caret
    Q:how much does mustee 24" x 24" 10" mop service basin weigh?
    by|Aug 24, 2022
    1 Answer
    Answer This Question

    A:  The model 63M Mop Service Basin weighs 32 lbs.

    by|Aug 29, 2022
      caret
      Q:How much does it cost to install a 24×24×10 in concret mop basin???
      by|Nov 7, 2020
      2 Answers
      Answer This Question

      A:  Depends on who installs it and how much they charge by the hour.

      by|Mar 10, 2022
        1 found this answer helpful

        A:  You would need to get a quote from the installing plumber. It depends on the access to the drain line and water.

        by|Nov 9, 2020
          caret
          Q:Is this, or any other brand offer an off set or rear drain configuration?
          by|Nov 14, 2019
          1 Answer
          Answer This Question

          A:  Mustee only offers 2 Mop basins, a 24x24 and 24x36. The drain is centered on both. Go to www.mustee.com for complete information

          by|Nov 15, 2019
            caret
            Q:can I get this service basin in 36 in. or wider ?
            by|Sep 18, 2019
            1 Answer
            Answer This Question

            A:  No, this is not available in 36 in. or wider.

            by|Sep 20, 2019
              caret
              Q:Drain location
              by|Sep 21, 2018
              2 Answers
              Answer This Question

              A:  Center of the basin

              by|May 6, 2023

                A:  Drain is on a 12" by 12" center

                by|Feb 21, 2023
                  caret
                  Q:I have this model installed currently. I'm trying to remove it and install a new on because its cracked. I don't understand how this is currently installed. I try to pull up on it, but it seems like its glued down near the center where the drain is but again, not sure since the corners lift off the ground a bit. so the question is, how is this installed to a floor drain?
                  by|May 29, 2018
                  3 Answers
                  Answer This Question

                  A:  It uses a doughnut gasket that is a friction fit, it might help to heat it up with a heat gun when trying to pull it up off of the gasket, if the installer used silicone then you may have to “surgically remove it), cut it out carefully

                  by|May 5, 2023

                    A:  Yes but it should not be glued. There is a rubber gasket between the sink and the drain

                    by|May 6, 2023

                      A:  There should be a black rubber washer around the drain pipe that needs to come out to release it.

                      by|May 5, 2023
                        caret
                        Q:Is there 24"×36" available?
                        by|Aug 7, 2017
                        1 Answer
                        Answer This Question

                        A:  No, it doesn't have a 24"×36" measurement.

                        by|Apr 23, 2019

                          Frequently Bought Together

                          +
                          +
                          Price:
                          $167.08

                          Compare Similar Items