Questions and Answers for MOEN Banbury 18 in. Towel Bar in Chrome

A:  Hello FaMi and thank you for your interest in Moen products. The Moen Banbury 24 in. Towel Bar in Brushed Nickel (2-Pack Combo) is 24 inches from the center of both posts. The towel bar is approximately 21.5 inches. The overall length is approximately 26 inches. Should you have any additional questions or pre-purchase assistance regarding the Moen product, please contact Moen directly at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday.

A:  Hello Bill and thank you for your interest in Moen products. The Moen Banbury 24 in. Towel Bar in Chrome has a 5/8” inner diameter. If you have additional questions, please feel free to call us at 1-800-289-6636. Our business hours are 8:00 a.m.-7:00 p.m. Eastern Time Monday through Friday.

A:  I am not sure, but I would tape wear I wanted to cut and then use a hack saw.

A:  Hello Michman and thank you for your interest in Moen products. The Moen Banbury 24 in. Towel Bar in Spot Resist Brushed Nickel does have a towel bar that can be cut down to size; however, Moen does not provide support for this action. Should you need assistance or have pre-purchase questions, please contact us directly at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  Yes!

A:  Hello Karl and thank you for your interest in Moen products. The Moen Banbury 18 in. Towel Bar in Spot Resist Brushed Nickel can be shortened to fit your needs. Should you have additional questions, please feel free to contact Moen directly at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  Hello Kath and thank you for your interest in Moen products. The Moen Banbury 24 in. Towel Bar in Mediterranean Bronze uses set screw size M4 x .7 x 10mm. Should you have any additional questions, please contact Moen directly at 800-289-6636. Our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday Eastern Time.

A:  Hello and thank you for your interest in Moen products. Moen is a global company, most products are assembled in the USA with domestic and foreign parts. Should you have any additional questions regarding a Moen product, please contact Moen directly at 800-289-6636. Our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday Eastern Time.

A:  I doubt it, but I didn't to the install, so I cannot say for sure. Call/visit a store to ask.

A:  Yes, if you have some Sheetrock anchors the you can screw into the Sheetrock. 

A:  The best way is use a drill to make pilot holes in the wall, then screw in the fasteners. Or you may be able to use an awl to make shallow pilot holes then try the screws with a screwdriver.

A:  You could if your wall are wood..... If your walls are drywall.....your gonna need to use anchors, and they need a certain size hole drilled into the wall for them to work

A:  Hello LSHD and thank you for your interest in Moen products. The Moen Banbury 24 in. Towel Bar in Spot Resist Brushed Nickel is designed to be installed with a drill. Should you have any additional questions, please contact Moen directly at 800-289-6636. Our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday Eastern Time.

A:  Hello Diana and thank you for your interest in Moen products. The Moen Banbury 24-inch Towel Bar is approximately 5/8” in diameter. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  2.25 inches