Questions and Answers for MOEN Velocity 2-Spray 8 in. Single Wall Mount Fixed Adjustable Spray Shower Head in Chrome

A:  Hello Jacob and thank you for your interest in Moen products. The Velocity rainshower showerhead does have a swivel ball that will allow you to adjust the showerhead. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  Yes. you can turn it at an angle

A:  The head does swivel a bit, but not as much as it should. I think it was designed to do rain shower and not at an angle.

A:  The shower head is adjustable. The little handle also can concentrate the water coming out by closing the outer rings of nozzles.

A:  It can be attached to a conventional angled water pipe that protrudes maybe 4" from the wall at ~7' height, for example. You don't have to use this as a "rain shower" that uses an extension so the head is directly above your head. We have this in one of our guest baths (see photo). Hope that helps.

A:  Yes... to some degree. Used as a "rain " shower there is not enough pressure to push it out very far at an angle. However, there is a toggle on the shower head to allow for more pressure, albeit, a little more narrow. Over all, a very good quality unit.

A:  It works both ways. If I was to guess it doesn’t swivel as much as your run of the mill head. Also “on an angle” I have noticed that sometimes water doesn’t quite come out of the uppermost shower holes but this will depend somewhat on your water pressure. I would say I have decent pressure and the very top hole or two sometimes just dribbles water out while the rest is flowing well. FWIW I recommend this shower head but it’s not leaps and bounds better than cheaper items.

A:  I have this showerhead and yes, it does pivot on a ball joint so it can be angled. However, the degree of movement is fairly limited so the angle of the shower arm you attach it to will be part of the equation in determining the final angle you are hoping to achieve.

A:  We replaced a standard shower head with this one, added a longer shower arm and that was it. Used with same valve we've had for years - did not purchase any additional equipment. We've had it for about 2 years and LOVE it!!!!

A:  No need to purchase anything else. I have an old single handle Delta valve and it works great. Really a great shower head.

A:  Hi Sharon. The Velocity 2-Spray 8 in. Rain Showerhead, #S6320, may not operate optimally without a corresponding pressure balanced valve such as the Moen posi-temp valve. We cannot speculate on compatibility with another manufacturers valve.

A:  I used it with our existing faucet handle. No, I don't think you have to do what youre asking. However, if you want an incredible shower, take out the little plastic water saving thingamajig inside. just put a large drill bit on drill and carefully, slowly, drill into little plastic thing that is down in there a ways, and then reverse drill and back it out and it will come right out on the bit. very easy. you wont hurt anything else down in there. and OMG. what an amazing shower you will have from then on!

A:  Since the only item contained in the box is the head itself, which is screwed into the threaded end of the pipe feeding water from the house water supply into the shower stall, I think installing a hand-held shower or diverter would be totally up to you. I am not an expert, but I would guess that setting up a handheld shower and diverter would involve something you would have to install (or have installed) at the point where the water pipe enters the shower stall in the form of a component that would allow the water to be diverted to the hand-held shower tube and head, but that is just a guess. Another approach, somewhat more ambitious, would be to have a separate pipe feeding water into the shower stall at a lower position than the standard shower head and attach a hand-held shower and tube to that second water pipe. You would of course also have to install a diverter so that you could switch the water flow between the fixed, on-the-wall shower head and the hand-held shower head. The key point is that the only thing in the box is the screw-on shower head, so you can do anything you want in addition to that in the way of a hand-held shower or diverter if you can rig it up yourself (or have it set up for you by a plumber).

A:  Hello SS and thank you for your interest in Moen products. The Moen Velocity 2-Spray 8 in. Rainshower Showerhead Featuring Immersion in Chrome works with any of our decorating styles. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  Yes!

A:  Hello Ramesh and thank you for your interest in Moen products. The U.S. Energy Policy Act restricts the maximum flow of plumbing products and the removal of flow control devices. All Moen Products comply with the Federal Law. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  The restrictor can be removed with some difficulty. The head works well even with it in. It is a very expensive unit to void the lifetime warranty. Restrictor is pressed in.

A:  I have a large shower area and bought a 16" extension arm so I could have an overhead rain effect and it works great. Gentle yet good volume.

A:  Hello Poshpadz and thank you for your interest in Moen products. The Velocity 2-Spray 8 in. Rainshower Showerhead Featuring Immersion in Chrome requires at least a 6” shower arm. If you have additional pre-purchase questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  This product is 8 inches in diameter so a minimum 6 inch wall extension is needed.

A:  Hello Overhead and thank you for your interest in Moen products. The Moen Velocity 2-Spray 8 in. Eco-Performance Rainshower Showerhead Featuring Immersion in Brushed Nickel is designed to perform as an overhead showerhead. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  no not strong enough

A:  It is a rain shower head, if your looking for a very soft wide flow, works well. I bought it as a second head.

A:  Hello n1992 and thank you for your interest in Moen products. The Moen Velocity 2-Spray 8 in. Eco-Performance Rainshower Showerhead Featuring Immersion in Chrome is designed to compliment any faucet and shower collection. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  Hello Bob and thank you for your interest in Moen products. The Moen Velocity 2-Spray 8 in. Eco-Performance Rainshower Showerhead Featuring Immersion in Chrome coordinates with various trim/valve kits. If you need additional pre-purchase assistance, please feel free to call us at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  Hello Pattycake and thank you for your interest in Moen products. The rainshower description refers to the spray pattern of the water. If you have additional pre-purchase questions, please contact 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  Just like any shower you control the temp with the water faucet.

A:  Hello Buff and thank you for your interest in Moen products. The Moen Velocity 2-Spray 8 in. Rainshower Showerhead Featuring Immersion in Chrome does not regulate the water temperature. Temperature would be regulated by the valve that you choose to install. If you have additional pre-purchase questions, please feel free to contact 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST.