Questions and Answers for MOEN Waterhill 14 in. Shower Arm in Brushed Nickel

A:  Hello Chooch and thank you for your interest in Moen products. We would suggest a shower arm diverter such as a Moen CL707 or A720 to be attached to the Moen Waterhill 14 in. Shower Arm in Chrome to operate a hand held shower with the shower head. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 a.m.-7:00 p.m. Eastern Time Monday through Friday.

A:  I don't have the magnetic handheld, but I would say this arm will help....there is ample room around it! No you've given me an idea to try with the handheld.

A:  Hello CJD and thank you for your interest in Moen products. The Moen Waterhill 14 in. Shower Arm in Chrome is compatible with your Moen Attract Magnetix Hand held, 26008. For further assistance, please feel free to call us at 800-289-6636. Our current business hours are Monday through Thursday from 9:00 am – 5:30 pm, and Friday 9:00 am – 4:30 am (Eastern Time).

A:  Hello Liria and thank you for your interest in Moen Products. The Moen Waterhill Shower Arm in Oil Rubbed Bronze can be used with the Moen S6365ORB Voss 6" Single-Function Rainshower. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 9:00 am - 5:30 pm (Eastern Time).

A:  Yes. It has a standard thread for shower heads, and the finish will match closely enough it won't be a problem. The S6365ORB had a small pivot adjustment so you can angle it correctly with the extension. Mine worked perfectly with another Moen head.

A:  Yes, this unit is compatible with a 9 inch rain showerhead, such as Moen model #21920.

A:  Hello Emily and thank you for your interest in Moen products. Moen’s Waterhill 14in. Shower Arm is compatible with Moen’s Ashville One-Function 9” Diameter Spray Head Rainshower. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  yes, we bought 56320 with this arm and have plenty clearance. the 9 inch should fit fine

A:  Hello Caliute and thank you for your interest in Moen products. The Moen Waterhill Shower Arm in Brushed Nickel was designed to accommodate a shower head with a 1/2" connection. The diameter of the shower head is personal preference. If you have additional pre-purchase questions, please contact 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  More important than the size of the head would be weight. It will depend on what type of pipe it is attached to and how well that pipe is attached to studding in the wall. We have a 8" rain head attached to ours. I would not try sand swing from it, but it has been in use for 5 years now with no issue. Something like this might be what you want... http://www.homedepot.com/p/Symmons-Bramwell-1-Spray-5-9-in-Showerhead-in-Satin-Nickel-151SH-STN-RP/205381356

A:  The escutcheon, (wall trim) as shown was with the one I purchased.

A:  Hello Mary and thank you for your interest in Moen products. The Moen Waterhill Shower Arm in Brushed Nickel, item S113BN, does include the flange. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday EST

A:  Hello Keith65044 and thank you for your interest and support of Moen products. The height difference from the center of the inlet pipe to the center of the outlet pipe is 2-¾”. Our specially trained Product Consultants are available via our Helpline for technical and pre-purchase assistance. Please feel free to call us at 800-289-6636; our business hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  It is about the same, this bar is more for installing a rain or flat shower head. Without this goose neck a rain shower head with straight bar would be about 8" or more lower which would make it impossible to shower under.

A:  This arm will allow a flat rain head installation. See picture.

A:  Hello George and thank you for your interest in the Moen Waterhill Shower Arm in Brushed Nickel. This shower arm extends 14” out from the wall, with a rise of 6-1/8”. The Moen shower head will swivel approximately 20 degrees in any direction to adjust the angle. If you have additional questions please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  The end of the bar is not vertical but the Delta shower head I have swivels so it can point down or at an angle.

A:  I used the Moen Model # S6320 8" as a shower head, Yes, it is slightly off (@5 degrees) from the horizontal. I did notice that at installation. However, I haven't noticed a difference in the outcome. Still get a great shower. B-)

A:  Hello Josey and thank you for your interest in Moen products. You can add a hand held showerhead to the MOEN Waterhill Shower Arm in Oil Rubbed Bronze with the addition of the MOEN Shower Arm Diverter in Oil-Rubbed Bronze, part number A720ORB. Please feel free to contact us prior to purchase for recommendations best suited for your project. We would be able to verify kits needed for your project and make product recommendations best suited for your situation. Don't hesitate to call us at 1-800-289-6636 or visit the "Contact Us" tab on www.moen.com to send us an email. Our business hours are 8:00 am – 7:00 pm Monday through Friday and 9:00 am – 3:00 pm on Saturday EST. We are here to provide support and ensure you will be satisfied with your Moen product.

A:  Yes. It will accommodate any type of shower heard or hose. It is merely a replacement for the pipe that was previously installed, which is pretty universal.

A:  Hello Nina. Thank you so much for your interest in Moen products. The Waterhill shower arm and flange can be used with any of our showerheads. It is mostly used with the larger showerheads, like our rainfall showerheads. You may use the S112 which is from our Waterhill collection also. If you have additional questions, please complete the form at http://www.moen.com/consumer-suppoert/contact-us or call Moen at 1-800-289-6636. Our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday and 9:00 a.m. - 3:00 p.m. Saturday EST.