A: Easily
A: Yes
A: Hello Betsy and thank you for your interest in Moen products. The Home Care 36 in. x 1-1/2 in. Concealed Screw Grab Bar with SecureMount in Peened Stainless Steel has not been tested for installation outdoors, we cannot guarantee how it withstand the elements. It does need to be installed into studs on each side. Should you have additional questions, please feel free to call us at 800-289-6636. We are available Monday through Friday from 9:00 am - 5:30 pm EST
A: Depends on what is behind the wall. Need sufficient material to anchor it. Why one would do this is another matter entirely
A: With the Proper fasteners, like Tapcons, I don't see why not.
A: I can't think of any reason not to install outside. I just put one in the shower. However, be sure that the wall behind the stucco as well as the stucco itself can support screws/anchors that can be tightened with a lot of force. The bar should be able to securely hold the weight of someone hanging on it to steady themselves in any weather (including icy conditions) without the bar wiggling the slightest. Moen (manufacturer) says that the bar itself will sustain 500 lbs., but that depends on how it is attached.
A: Hello paul and thank you for your interest in Moen products. The Moen Home Care 24 in. x 1-1/2 in. Concealed Screw Grab Bar with SecureMount in Stainless Steel is packaged with the 2” mounting screws. The grab bar is designed for installation into a stud. The SecureMount Anchors are recommended for use in nonstud (hollow-wall) applications per installation instructions. The SecureMount Anchros are old separately. If you have additional questions, please feel free to call us at 800-289-6636.
A: I purchased them separately
A: The answer I rec. for my question, is just not correct as we have several other grab bars, that are peened, for safety and we are looking for another 18 1/2 chrome and peened.
A: Hello Gretel and thank you for your interest in Moen products. The Moen R8918 Home Care 18 in. x 1-1/2 in. Concealed Screw Grab Bar with SecureMount in Stainless Steel bar is not textured. Should you have any additional questions, feel free to call us at 1-800-289-6636. Our current business hours are Monday through Friday from 9:00 am - 5:30 pm (Eastern Time).
A: No, it's got a brushed stainless surface that's not slippery.
A: Hello Gretel and thank you for your interest in Moen products. The Moen R8918 Home Care 18 in. x 1-1/2 in. Concealed Screw Grab Bar with SecureMount in Stainless Steel bar is not textured. Should you have any additional questions, feel free to call us at 1-800-289-6636. Our current business hours are Monday through Friday from 9:00 am - 5:30 pm (Eastern Time).
A: Hi Gretel. No, the bar does not have a textured part. I honestly have never seen a grab bar with a textured handle. I hope this helps!
A: Hello MitchG and thank you for your interest in Moen 18 in. x 1-1/2 in. SecureMount Concealed Screw Grab Bar in Stainless Steel model R8918. This product is installed with 2” screws (provided) using the hardware going into a stud. You would use a 5/16” drill bit. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 9:00 am – 5:30 pm (Eastern Time).
A: Its 2" screw comes with grab bar. Using Philips screwdriver 3/8mm diameter approx.
A: Depends on the material being drilled. First, use different screws. Moen supplies stainless steel screws, but the heads strip out unless u r careful. if u r drilling thu tile, select a bit just larger than the treads for the tile hole. Then, if you r hitting a stud, just screw into it. If it is to be attached with an anchor, follow those directions.
A: Hello whyyouneedanickname and thank you for your interest in Moen products. The Moen 24 in. x 1-1/2 in Concealed Screw Grab Bar in Stainless Steel includes six #10 woodscrews with a tapered end. The pilot hole size should be 13/64”. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
A: Hello and thank you for your interest in Moen products. The Moen 18 in. x 1-1/2 in. SecureMount Concealed Screw Grab Bar in Stainless Steel design allows for secure and lasting installation into any stud at any angle. Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the Moen SMA1000CH SecureMount Anchors are recommended for use in nonstud (hollow-wall) applications per installation instructions. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
A: it is made to be mounted with screws to wood bracings or studs in the wall
A: It is attached with provided screws. You will need to drill holes into stud for secure attachment
A: Yes it will, you will have to drill 3 holes on each end to attach it. You might want to be sure that's what you want to do before drilling those holes. If you want remove it in the future you will have to live with those 6 holes in your tub or repair them somehow. It will be very difficult to repair those holes and make it look nice again.
A: no. you have to secure it by screws.
A: No, these are safety bars. I installed two of these (different lengths) in a newly installed fiberglass tub with wall surround. The recommended attachment method is to screw directly into the studs behind the fiberglass wall. My wife is extremely happy with these as they enable her to get in/out of the tub safely.
A: about 2"
A: Hello Sam and thank you for your interest in Moen products. The Moen Secure Mount 48 in. x 1 ½ in. Concealed Screw Bar has a 1 ½” clearance from the bar to the wall where mounted. If you have additional questions or concerns, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
A: There's 1.5" of clearance between the bar and the wall, plenty of space for virtually everyone's fingers to get a solid grip on the bar.
A: The screws I used were approximately 1.5” long inserted into a plastic “Molly”. I believe that is the correct term. I was not able to find a stud.
A: Hello Oxy and thank you for your interest in Moen 24 in. x 1-1/2 in. Concealed Screw Grab Bar in Stainless Steel model R8924. This product is installed with 2” screws (provided) using the hardware going into a stud. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
A: No
A: You could mount these in several ways. It comes with screws & plastic anchors. The strongest method is screwing it direct to the beams. Most house beans are 18 inches of center in mos houses. But you need a stud finder to find the beams. Second method is using plastic anchors if your wall is hollow. Third method is using butterfly anchor bolts, which you have to buy. The first two methods should come with the grab bar.
A: The grab bar was installed with the tools that it came packaged with. It was installed in less than 15 minutes by my son. This was installed outside my front door and great and helpful in the winter time.
A: Hello Gail and thank you for your interest in SecureMount 36 in. x 1-1/2 in. Concealed Screw Grab Bar in Peened Stainless Steel model R8936P. This product comes with hardware for mounting through a finished surface into a stud. Using Moen’s Securemount Anchor system SMA1000CH, purchased separately, Moen Securemount Grab Bars can be mounted onto a variety of substrates. These include ½” drywall, ½” drywall with tile, ½” drywall with marble, 5/8” drywall, 5/8” drywall with tile, 5/8” drywall with marble, 1/8” fiberglass tub surround and ¼” fiberglass tub surround. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
A: No, I didn't need any special kits.
How can we help?