Questions and Answers for Lutron Skylark Dual Dimmer Switch, Slide-to-Off, 300-Watt Incandescent/Single-Pole, White (S2-LH-WH)

A:  Hello John, thank you for your inquiry. We're here to help! Please reach out to our Support Team at support@Lutron.com or give us a call at 1-844-LUTRON1 for additional assistance pertaining to replacing Skylark split knobs.

A:  we have checked into it and not found a dual slide dimmer that is LED compatible at this point. you will most likely experience some blinking at a certain point when you slide it

A:  The S2-L is rated for 300W (per citcuirt) of incandescent/halogen only, and currently Lutron does not have a dual control rated for use with LEDs.

A:  The S2-L-WH is a dual circuit dimmer that could control two separate lighting circuits individually. Each circuit is rated for up to 300W of incandescent/halogen lighting loads. As long as each circuit meets this specification, this control will work for your application.

A:  Yes, I have been using this switch with two sets of kitchen lights: one set (5 bulbs) secured on the ceiling and another set (6 bulbs) secured to the bottom surface of the cabinets.

A:  No, this dimmer cannot control the fan. This is for dimming two separate lights.

A:  The S2-L is rated to control lighting loads only. This device is not rated to control fan loads. Lutron would suggest reaching out to our Support Team at support@lutron.com or by phone at 1 (844) 588-7661 for assistance with this inquiry.

A:  Worked for mine thank goodness because we couldn't find any alternative.

A:  This product is only rated to control incandescent or halogen style bulbs and is not recommended to be used in a LED application.

A:  It has a click all the way at the bottom when pushed down, this indicates a complete shut off. I combined mine with a low watt bulb for additional savings. Totally worth it.

A:  Yes, this unit does click at the bottom when turned off in order to cut power to the lights.

A:  The S2-LH-WH is rated for 600W of incandescent/halogen lighting loads only, 300W per circuit. Lutron would not suggest using LED or CFL with this device.

A:  Hello Pinny, I’m Chris from the Home Depot’s how-to Community. Thank you for your question. No, this dimmer is for incandescent lights only. What you need to look for are dimmers rated C-L that are made to work with either fluorescent or LED lamps. The circuitry in CFL and LED lamps require a different type of dimmer. I hope this helps, Chris. .

A:  In order to find replacement knobs for this product, I would recommend reaching out to Lutron's customer service department at 1 (888) 588-7661 where a representative would be happy to assist you in finding these parts.