Q:Can this vacancy switch be used to control a bedroom ceiling fan? I have typical Hunter ceiling fans in my daughters' bedrooms and they tend to turn them on every time they enter the room. I'd like to use this switch to turn off the fan when they leave.
by|Apr 21, 2024
1 Answer
Answer This Question
A: Hello SpecialK, thank you for your inquiry! Yes, you can use MS-VPSHM if your ceiling fan is a pull chain ceiling it will be able to turn off your fan within the time setting of either 1 minute, 5 minutes, 15 minutes, or 30 minutes, when no motion is detected.
If you still have further questions or concerns, you can contact our Support Team at support@lutron.com or call 1-844-LUTRON1. We're here 24/7, you can call us any day or anytime.
by|Apr 23, 2024
Q:I have two questions.
One, can this be used in a damp location?
Can I set this up so there are two of these switches in a three way set up?
Note: The lights are already in and functioning with a single pole motion detector switch
by|Apr 24, 2023
1 Answer
Answer This Question
A: Hello Dan, thank you for your question. Lutron products, including the MS-VPS5MH, are rated for 32 °F to 104 °F (0 °C to 40 °C), 0%–90% humidity, non-condensing, and are for indoor use only. You may only use one Maestro sensor in a multi-location application; the other switch must remain either an existing 3-way switch or an MA-AS Maestro Companion Switch. See the below spec sheet for more information:
https://assets.lutron.com/a/documents/369666.pdf
We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at support@lutron.com.
by|Apr 24, 2023
Q:Can I use this switch in a 4-way configuration? (one set of garage lights, two manual switches, plus this unit)
by|Sep 30, 2020
1 Answer
Answer This Question
A: The MS-OPS5M can be used in single pole, 3-way or multi-location application. For 3-way applications Lutron recommends either a traditional 3-way switch or the companion switch (MA-AS). In multi-location applications, the companion switches (MA-AS) are required. For more information on wiring please visit https://www.lutron.com/TechnicalDocumentLibrary/369488.pdf
by|Jun 2, 2023
1 found this answer helpful
Q:Can I use this switch to run a bathroom fan even during day time? There is a window on the bathroom and the light will not let most sensors.
by|Sep 1, 2020
1 Answer
Answer This Question
A: The MS-VPS5M can be used with a bathroom fan. This particular sensor is "vacancy only" which means it will only turn on manually, and then turn off automatically after the bathroom is unoccupied.
by|Sep 3, 2020
Q:Is there a lighted switch version of this unit to aid someone walking into a dark room seeking the switch??
by|Jul 3, 2020
1 Answer
Answer This Question
A: Lutron recommends the MSCL-OP153M or MSCL-VP153M. These are the Maestro occupancy and vacancy sensor dimmers that have small indicator lights on the left that will emit a faint glow while the dimmer is off, making it easier to locate in the dark.
by|Jul 6, 2020
Q:Does it have a over ride switch to leave the light on if your in the shower?
by|May 3, 2020
1 Answer
Answer This Question
A: Lutron Maestro in-wall sensors do not have a setting to override the auto-off feature. The sensor will always shut the light off when the programmed Timeout limit has been reached. The longest Timeout setting for the MS-VPS5M is 30 minutes.
by|May 6, 2020
Q:can i put it on any time or is it fixed to a time ??meaning if i wanted to put it on a 3min on and off can i do it with this product
by|Feb 13, 2020
1 Answer
Answer This Question
A: The MS-VPS5M has timeout settings of 1 minute, 5 minutes, 15 minutes and 30 minutes. These a preset times that cannot be adjusted.
by|Feb 17, 2020
Q:Can this switch be used together with a motion sensor switch in a 3-way situation? I want to change a regular 3-way switch into "3-way, one motion + one vacancy sensor switch". Will that work? and which ones should I choose?
by|Oct 31, 2019
1 Answer
Answer This Question
A: For 3-way applications, only one occupancy/vacancy sensor can be installed. The second location would need to be either a standard 3-way mechanical switch or the Lutron companion switch (MA-AS). For a recommendation on how to accomplish multiple occupancy/vacancy sensors on a 3-way lighting circuit, please reach out to our Support Team at support@Lutron.com or by phone at 1 (844) 588-7661.