Questions and Answers for Lithonia Lighting Bronze Outdoor Integrated LED Wall Pack Light with Dusk to Dawn Photocell

A:  OLWP 11 PE BZ M4 has been discontinued. Recommended replacement: TWX LED https://images.thdstatic.com/catalog/pdfImages/09/0975994e-4d8b-4378-b41f-b96b41941633.pdf

A:  Yes.

A:  Intergrated LED No bulbs to replace

A:  You can not - LED assembly is permanently installed and is not replaceable. With that said, LED board appears to be of good quality, is well heat-sinked (i.e., can transmit heat generated by LEDs to aluminum casing for dissipation), and Power Supply appears to be good quality. So, look on the bright side: this fixture lacks one more mechanical connection that can cause a premature failure.

A:  No, the Outdoor LED light fixture are not equipped with dimmable drivers.

A:  I really do not know, but it is really a very good product.

A:  No. Power Supply is not rated for use with dimmers. As a general rule, anything with a day/night sensor (which this fixture features) is not dimmable.

A:  The sensor cannot be changed on the OLWP fixture. If the fixture does not work return the fixture to Home Depot for a replacement.

A:  Not possible; not user serviceable.

A:  No, it has only a simple (reliable) day/night sensor. If you cover sensor opening, light should turn on after about a 5 second delay.

A:  The fixture was never tested in a horizontal position so there is no guarantee in performance or what the light spread will look like in that application. Therefore, fixture can be mounted horizontally at own discretion.

A:  Yes - it can be mounted in any orientation that the electrical box is (holes in light line up with box).

A:  That depends on your level of expertise or lack thereof. I do all my own electrical, but then I am very experienced in electrical work. If you are installing it where there already is an existing fixture that you are replacing, then you should be able to do it. If you are installing it in a new, never-before-used spot, and requires a line supplied, then maybe you can't.

A:  Hello Dante, The light is hardwired and mounts to a standard 4" electrical box. If you don't have a pre-existing install location, or are unfamiliar with electrical wiring, I highly recommend having the install performed by an electrician. I hope this helps. Cheers, Chris

A:  Depends on your local code, unfortunately many states and local codes require an electrician to do ANY electrical work.

A:  If your locality requires all electrical work to be inspected, only if you have an existing electrical box in intended location. if not and you know how to run Romex and mount a weather-proof surface-mount box, you can put it anywhere your ladder can reach.

A:  No, you can't change the bulb because there is none. This is a complete unit with a lamp life of appx 50,000 hours. It uses no bulbs, just Cree style High-Output LED on a self-contained circuit board.

A:  There is no knock out hole.