Questions and Answers for Liberty 2-1/2 or 3 in. (64 or 76mm) Center-to-Center Antique Iron Dual Mount Cup Drawer Pull

A:  Thank you for your question on the PN1053C-FB-CP. This is a dual mount pull. These pulls have more than one center to center measurement. This pull will fit both 3" or 3-3/4" center to center hole. Best, Customer Care Team

A:  Thank you for your question on the PN1053C-FB-CP. These are not sold in bulk. Best, Customer Care Team

A:  Thank you for your question on the PN1053C-904-CP ( Liberty 2-1/2" or 3" Heirloom silver dual mount cup drawer pull. These pulls do not have a warm tone; but they can surely be a match. Best, Customer Care Team

A:  Jonny, thank you for your question on the Liberty 2 -1/2 or 3 in. (64 or 76 mm) Center-to-Center Heirloom Silver Dual Mount Cup Drawer Pull. The screw size is #8-32 x 1" cross slotted machine. Best, Customer Care Team

A:  Brenda, Thank you for your question on the Liberty 2 -1/2 or 3 in. (64 or 76mm) Center-to-Center Champagne Bronze Dual Mount Cup Drawer Pull. The back is concaved so you can pull the drawer out easily with four screw holes to mount either 2-12" or 3" center to center. Best, Customer Care Team

A:  Laura, Thank you for your question on the Liberty 2-1/2 or 3 in. (64 or 76mm) Center-to-Center Copper Kettle Dual Mount Cup Drawer Pull. There is not a specific bar pull that matches this pull. I apologize for any inconvenience this may have caused, Best, Customer Care Team

A:  It means you can attach thru either

A:  MichelleW, thank you for your question on the Liberty 2-1/2 or 3 in. (64 or 76mm) Center-to-Center Matte Black Dual Mount Cup Pull. This dual mount pull was manufactured to work with either center to center measurement. There are two sets of screw holes in the pull making it convenient for you to mount on a 2-1/2" center to center or a 3" center to center. Best, Customer Care Team

A:  Gibby, Thank you for your question on the Liberty 2-1/2 or 3 in. (64 or 76mm) Center-to-Center Polished Chrome Dual Mount Cup Drawer Pull. The pulls should not rust provided the installation is inside and not in constant contact with water. Best, Customer Care Team

A:  Jeannie, Thank you for your question. The overall height is 1.22", the length is 4.16" and the projection is 1.22". Best, Customer Care Team

A:  Frankie, thank you for your question. At this time, the Liberty 2-1/2 or 3 in. (64 or 76mm) Center-to-Center Brushed Satin Nickel Dual Mount Cup Drawer Pull does not come in a 4" center to center. Best, Customer Care Team

A:  These drawer pulls have two different holes in them that you can use to attach them onto your cabinets. I used mine in the center of the drawers and they mounted great! My cabinets were not drilled for pulls so I drilled my own holes. These were so easy to put on, did the whole kitchen in less than 2 hours and that was measuring and drilling and mounting them on the drawers. I used the matching round pulls for the upper and lower cabinet doors to match the drawers.

A:  Oh as far as the width, it says these ( the ones i bought ) have the two size holes in them to mount with ... 2 1/2 and 3 inch width hole... sorry, I dont know if these come in any bigger, Ive not seen any of so.