Questions and Answers for Liberty Carlton Bow 5-1/16 in. (128 mm) Satin Nickel Cabinet Drawer Pull

A:  Hello ED, Thank you for inquiring about item: Liberty Carlton 5-1/16 in. (128mm) Center-to-Center Dark Oil Rubbed Bronze Bow Drawer Pull. Yes the pull is made of steel and has a life time warranty covering any manufacture defects. I hope this helps! Thank you for being the best part of The Home Depot! We appreciate your business and look forward to serving you in the future!

A:  Ed, Thank you for the question on the Liberty Carlton 5-1/16 in. (128mm) Center-to-Center Dark Oil Rubbed Bronze Bow Drawer Pull. The pull is manufactured of steel and comes with a limited lifetime warranty that can be found halfway down the web page under Info and installation. Best, Customer Care Team

A:  Les, thank you for your question, and I am sorry for the confusion. This pull has an overall length of 7.28 inches, a screw to screw length of 6.29 inches, and a projection from the cabinet of 1.26 inches. We will get the measurements corrected. Best, Customer Care Team

A:  Andrea, Thank you for your question. The back of this knob is solid. Best, Customer Care Team

A:  It is solid where it hits the cabinet face, with the threaded hole for the bolt, of course.

A:  solid back

A:  Poor. The screws were not the right ones and I had to buy new.

A:  Open

A:  The small flat part which rests against the holes in the drawer front are solid with a hole for the bolts. Otherwise, the handle is open between it and the drawer front.

A:  The outside edge is 6".

A:  5-1/16 inches

A:  The dimensions of the product are as follows: Assembled Depth (in.) 1.18 Assembled Height (in.) 0.39 Assembled Width (in.) 5.24

A:  Hello Patty, We thank you for your interest in our product. The Carlton Collection Matte Chrome comes in the 3-384" (P0256B-MC-A), 5-1/16" (P0256A-MC-C), 6-5/16" (P0256C-C-MC-C) , 8-13/16" (P0256D-MC-C), and the 11-5/16" (PN0256-MC-A). Kind Regards, emccollum

A:  Thank you for your interest in our product. Our Bow Cabinet Hardware will not look out of place in the kitchen. They are designed for all cabinets. Kind Regards, emccollum

A:  It is 160mm from Hole-to-hole

A:  Thank you for your interest in making Liberty products a part of your home. In response to your question the center-to-center measurement for our Carlton 6-2/7 in. Bow Cabinet Hardware Appliance Pull (model # P0256C-FB-C) is 6 inches. For additional assistance in locating the cabinet hardware that best suits our needs, please contact Customer Service or visit your local Home Depot store.