Q:What would be the correct temperature to apply it?
by|Mar 22, 2024
1 Answer
Answer This Question
A: 55 degrees and rising.
by|Mar 22, 2024
Q:After 2 weeks the filled cracks are still soft and squishy. A car drive on it and left impressions. What can I do to stop this and fix the deep tread marks?
by|Aug 27, 2023
1 Answer
Answer This Question
A: Crack fillers are designed to remain pliable, that is why it is important for the material to be in the cracks and not on the surface. Covering the repaired areas with a skim coat of trowel patch will provide a hard coating and covering any imprints.
by|Aug 28, 2023
Q:Can it fill small holes an inch or so wide and deep?
by|Nov 3, 2022
1 Answer
Answer This Question
A: yes
by|Jan 16, 2023
Q:what is the difference between this and the more commonly known product by the same company also used for filling cracks: https://www.homedepot.com/p/Latex-ite-1-Qt-2X-Premium-Blacktop-Crack-Filler-12112/100059967
by|Apr 22, 2022
0 Answer
Answer This Question
Q:What product is best to use on gap between asphalt driveway and concrete garage apron?
by|Oct 13, 2021
2 Answers
Answer This Question
A: Depends on the size of the gap. For 1/2" or less we would recommend Latexite Pli Stix. For cracks larger than an 1" we would recommend Latexite Quick patch.
by|Jan 3, 2024
2 found this answer helpful
A: I use the blacktop crack filler in the caulk tube. Tape off if you want a clean line. I do mine each fall right when it gets cool.
by|Dec 25, 2023
2 found this answer helpful
Q:Used this several years ago, but cracks have spread. Can I add more filler to new fine cracks or do I need to scrape out old filler first?
by|May 2, 2021
0 Answer
Answer This Question
Q:Can you use it to Fill cracks on a toilet
by|Oct 21, 2020
3 Answers
Answer This Question
A: Buy a new toilet...
by|May 7, 2023
A: No!
by|Apr 30, 2021
A: no, only asphalt.
by|Oct 22, 2020
Q:What is the cure time on this? 24 hours?
by|Oct 6, 2020
1 Answer
Answer This Question
A: Cure time is temperature dependent. In my experience it took several days mid July to cure. After cure, the material had shrunk so much that it was almost as thin as paint and did not fill the crack. Cracks filed were about 1/8 inch wide and 3/4 inch deep. I was not happy!