A: Please refer to the product manual, linked below, for specific product information.
https://images.thdstatic.com/catalog/pdfImages/01/0143dfab-9da7-4505-a02d-976acadc3bc1.pdf
by|Jan 23, 2024
Q:how thick are the ribs and the outer skins ?
by|Jan 17, 2024
1 Answer
Answer This Question
A: Please refer to the product manual, linked below, for specific product information.
https://images.thdstatic.com/catalog/pdfImages/01/0143dfab-9da7-4505-a02d-976acadc3bc1.pdf
by|Jan 23, 2024
Q:for the quarter inch thick material, how many cells/ribs per linear foot ?
by|Jan 17, 2024
1 Answer
Answer This Question
A: Please refer to the product manual, linked below, for specific product information.
https://images.thdstatic.com/catalog/pdfImages/01/0143dfab-9da7-4505-a02d-976acadc3bc1.pdf
by|Jan 23, 2024
Q:Can this be used to create a shower enclosure
by|Jan 4, 2024
1 Answer
Answer This Question
A: Yes, this material can be used for that purpose.
by|Jan 8, 2024
Q:For the 48”x96” panel, do the channels run 96”?
by|Nov 30, 2023
1 Answer
Answer This Question
A: Yes, they run longer length.
by|Dec 1, 2023
Q:Who can help with specific design and custom build questions....phone number. please
by|Nov 6, 2023
1 Answer
Answer This Question
A: For specific project questions please give our customer service team a call at 1-800-421-0102 and they will be able to help you.
by|Nov 7, 2023
Q:This is a 2' x 4' panel. Do the channels run the length of the 4' section or the 2' section?
by|Oct 28, 2023
1 Answer
Answer This Question
A: The channels run 4 feet in length.
by|Oct 30, 2023
Q:The 1/4” (6mm) 4x8 polycarbonate sheets I bought has one side with clear protective wrap and the other side has blue protective wrap. Which side is the UV protected side?
by|Oct 27, 2023
1 Answer
Answer This Question
A: The panels will have a sticker on the side that is UV coated, stating which side to face toward the sunlight.
by|Nov 5, 2023
1 found this answer helpful
Q:What is the overall thickness of 6 mm material?
by|Oct 26, 2023
1 Answer
Answer This Question
A: This sheet is approximately 0.25 inches thick.
by|Oct 30, 2023
1 found this answer helpful
Q:Is there a way to join the ends (not the sides/edges) of the pergola sheets? my pergola will be about 13' long so I'm curious how to go about it if possible. would I have to use the H channel perpendicular then or is there another way? longer sheetS?