Questions and Answers for KRAUS Kore 30 in. Undermount Single Bowl 16 Gauge Stainless Steel Kitchen Workstation Sink w/Integrated Ledge and Accessories

A:  It's not listed as an available accessory on the Kraus website - but you might try calling the company.

A:  Hi Katie, Thank you for reaching out! we can assist you with getting a replacement bottom grid for your sink. Please contact us directly by phone at 1-800-775-0703 or by email at CustomerService@kraususa.com so that we can assist you in getting a replacement grid for you sink.

A:  That is a great questions and I can answer that for you. This model sink is designed to be installed into a 39" cabinet properly with the mounting hardware provided. Please feel free to reach out to us at 800-775-0703 or via email at customerservice@kraususa.com with any additional questions.

A:  Hi Brad, Thank you very much for your interest in our kitchen sink! it will be my pleasure to answer your inquiry. This model kitchen sink has a satin stainless finish and does not show as much deposits as a brushed finish, however deposits can happen and is completely dependent on the quality of the water supply. The great news is the sink can be cleaned with ease and maintain is luster for the lifetime of the sink. Please feel free to reach out to us at 800-775-0703 or via email at customerservice@kraususa.com with any additional questions.

A:  yes I get some water spots but not too bad, but I have on every stainless steel sink I have. My salesperson told me to use Pledge furniture polish on the sink and it will minimize the water spots ( wonder if Turtle wax would do the same and last longer?). . I always have my chopping block and rubber dish mat in place on the ledge, so it does help to hide it if I choose not to scrub and polish it as often.. My one complaint on the sink is that the corners are squared so it is a bit harder to keep them clean. I am pleased with this sink, it is the 2nd house I have had it installed in.

A:  Hello Cindy, That is a great question and we can assist you with that. We make many different accessories for our workstation sinks and we can help you find the ones you are looking for. Please contact our customer service at 1-800-775-0703 or customerservice@kraususa.com so we can help you find what you are looking for.

A:  Hi Chuck Thank you for your interest in our kitchen sink! I can answer your inquiry. This model sink has more than one cutout dimension depending on the type of reveal you would like, every sink has a unique cutout required and will not fit another model sinks cutout. All of our sinks are provided with a cutout template to properly install your new sink. Please feel free to reach out to us at 800-775-0703 or via email at customerservice@kraususa.com with any additional questions.

A:  Hello Kelley, Hi , That is a great question and I will be happy to answer that for you! Kraus USA provides the warning label to comply with the California Safe Drinking Water and Toxic Enforcement Act of 1986, or more commonly referred to as “Proposition 65”. Many products sold in California are required by law to carry the label. We are providing Prop 65 warning labels simply to inform California consumers that the product contains chemicals on the State of California’s Prop 65 list. There are over 800 chemicals on the Prop 65 list. Even though a product may be found to contain a Proposition 65-listed chemical, it does not mean that use of the product will cause cancer, birth defects or other reproductive harm. Nor does it mean that a product is unsafe. All Kraus USA products meet or exceed the requirements of applicable product performance and US safety industry standards, as well as the federal Safe Drinking Water Act. We are confident there is no health hazard associated with the installation or removal of Kraus products. Why is the label included on my faucet if I do not live in California? Kraus USA products are sold nationwide and it would be considerably complex to determine which products will be brought into California. Therefore, to ensure compliance with Proposition 65 requirements, we have decided to include this warning label on all our products, regardless of where they might be purchased or sold. Please feel free to reach out to us at 800-775-0703 or via email at customerservice@kraususa.com with any additional questions.

A:  Mine came with two, one for each side.

A:  Hi Sharon, Thank you for reaching out, I can answer your question. This model sink comes with two bottom grids, one for each bowl. Please feel free to reach out to us at 800-775-0703 or via email at customerservice@kraususa.com with any additional questions.

A:  Hello Leon, thank you for inquiring about our kitchen sinks. Please contact us directly by phone at 1-800-775-0703 or by email at CustomerService@kraususa.com so we can discuss all available options in further detail.

A:  Hi Michelle, Thank you for your inquiry, we can answer that for you. Scratches are inevitable in any sink material, including stainless steel. These are merely usage scratches. Overtime, these scratches will become uniform with the sink's grain and blend into the overall finish of your sink with proper cleaning. All sinks manufactured in stainless steel perform in exactly the same way. The surface scratches which appear on stainless steel sinks rarely have any appreciable depth and will become less noticeable with age. Your sink will look better a year after installation than during the first few months of use due to the fact that the scratching will have evened out. Please feel free to reach out to us at 800-775-0703 or via email at customerservice@kraususa.com with any additional questions.

A:  Hello Jessw, thank you for reaching out to us, this is a great question and I would be happy to assist. The KWU110-32 isn't designed to be reversed so that the drain is on left side. If you have any questions regarding sinks that can be reversed, please contact us at (800) 775-0703 or VIA e-mail at customerservice@kraususa.com.

A:  You certainly could but keep in mind the drain will now be towards the front of the cabinet. This could make installing the disposal difficult and some cabinets may not have the depth up front depending where the cut out is. 

A:  I guess you can but be aware that the drain would then be in the front of the sink vs the back corner.  

A:  I put this sink in "backwards". It works fine and there is even room for a garbage disposal. It leaves much more space on the other side of the cabinet for trash cans, etc.

A:  If put in with drain on the left then the drain would be at the front of the sink instead of the back. The drain is in the corner of the sink. It would drain but I wouldn’t reverse it