Questions and Answers for KRAUS Soft Round Ceramic Vessel Sink in White with Sheven Faucet in Satin Nickel

A:  The entire faucet is 13 3/4" from top of vanity to top plate of the faucet. It is 9" from the top of vanity to the bottom of the faucet spigot.

A:  13 3/4" to top; about 9" to bottom of spout.

A:  Hi Billy, Thanks for your inquiry: faucet height: 13.75"

A:  Thank you for your question. The FVS-1002 Sheven faucet is available in 3 finishes; Chrome, Satin Nickel, and Oil-Rubbed Bronze. You can view each respective finish by adding the CH, SN, or ORB abbreviation when searching for the FVS-1002.

A:  I don't remember if they had any other finish choices, but I wanted the satin nickel or a brushed stainless steel look. Everyone one who has seen the setup likes the look. Very contemporary and very impressive.

A:  That is what I got and that is the finish that I wanted. Polished chrome also water marks very easily and one has to wipe down polished chrome constantly, almost after every use. I am an architect and I don't want polished chrome or stainless steel for any faucets, schuten plates or anything near water do to the constant maintenance required to keep chrome looking good. Chrome also shows scratches very easily. I like the brushed nickel or stainless steel look.

A:  Thank you for your question. The supply lines are 26-1/2" long and 3/8" compression, which are included.

A:  1/4" lines; this could be a problem with older houses or older city water lines. We had copper with galvanized laterals from the bronze knuckle in the wall. We also had a old galvanized supply line from the street which I had replaced several years ago. Still there was a sizable amount of rust in the copper lines and the laterals from the wall. I had to replace the old galvanized laterals ( a 6" and a 9" 1/2" dia. line). I also had to get new valves for the 1/4" lines. The lines did get plugged as well as the facet even though I had replaced the laterals. I had to flush the line at the new shut-off valves; take the 1/4" lines off and flush those; and the take the aerator end and screen off the spigot to clear out the rust particles. I did that twice and have not had a problem since then. The faucet with the 1/4" lines and the top shut-off/mixing valve works perfectly. No drips; no problems. I'd buy this entire setup again. The family and our guests love it and the price was really reasonable. Pop-up drain also works perfectly.

A:  1/4'

A:  Hello mylar, Unfortunately I'm unable to see the contents of your cart. I did however find the vessel bowl/faucet combo in a satin nickel finish. I've included the link below: Vessel Sink in White with Sheven Faucet in Satin Nickel: http://www.homedepot.com/p/KRAUS-Vessel-Sink-in-White-with-Sheven-Faucet-in-Satin-Nickel-C-KCV-141-1002SN/203205944?MERCH=REC-_-PIPHorizontal1-2-_-NA-_-203205944-_-N I hope this information helps. Cheers, Chris

A:  Thank you for your question. The FVS-1002 is available in chrome and satin nickel finish. You are able to place an order for the faucet and/or drain in satin nickel. We cannot confirm whether or not the sink will fit the vanity which is in your cart since we are not able to see what you may have placed in your cart. Please contact us at 1(800)775-0703 with additional information for vanity to be able to better assist you. Have a great day!