Q:For the slip connection, the installation instructions call for the copper tube to extend 4-3/4 inches from the wall. However, I can only get 4-1/4 inches of 1/2 copper tube to go into the spout. Please advise.
by|May 2, 2018
1 Answer
Answer This Question
A: Curtis, my name is Sarah with Kohler Co. I'm glad to answer your question. Unfortunately, 4-1/4" of tube would not be sufficient to attach this spout. It would require a 4-3/4" long tube. If you have any questions or need further assistance, please contact our Customer Service team directly at 1-800-456-4537. Thank you for choosing KOHLER.
by|May 5, 2023
Q:What diameter pipe is required for the slip connection?
by|Feb 5, 2018
2 Answers
Answer This Question
A: I used a 1/2-inch copper threaded on the wall flange side and fraught on the spout end. I had to use a small amount of tape to hold the clamp pieces in place then locked it in place with the set screw.
Overall it's a nice piece of hardware for the money.
by|May 5, 2023
A: Hi, this is Laura with Kohler Co. I am happy to assist you with your question. This bath spout requires 1/2" copper tubing for installation. Thank you for choosing KOHLER.
by|Sep 17, 2021
1 found this answer helpful
Q:What size copper pipe is needed for the slip connection?
by|Feb 5, 2018
2 Answers
Answer This Question
A: Hi, this is Laura with Kohler Co. I am happy to assist you with your question. This bath spout requires 1/2" copper tubing for installation. Thank you for choosing KOHLER.
by|May 5, 2023
A: 1/2-inch
by|May 6, 2023
Q:Can the slip connection be used with 1/2" copper pipe?
by|Feb 5, 2018
2 Answers
Answer This Question
A: Yes, that is the recommended pipe.
by|May 5, 2023
1 found this answer helpful
A: Hi, this is Laura with Kohler Co. I am happy to assist you with your question. Yes; copper pipe is required. Thank you for choosing KOHLER.
by|May 5, 2023
Q:Is this product compatible with the Archer Choreograph Tub and Walls?
by|Jan 15, 2018
2 Answers
Answer This Question
A: Hello, my name is Sarah with Kohler Co. I'm glad to answer your question. Yes, this spout can be used with the Choreograph shower walls and the Archer bath. Thank you for choosing KOHLER.
by|May 5, 2023
A: We mounted this spout on travertine tile and it's great. I would think it would mount on any smooth surface material.
by|May 5, 2023
Q:If my threaded pipe extends 4 3/8 inches from the tiled wall, which Kohler spout would work in my situation.
by|Jul 29, 2017
1 Answer
Answer This Question
A: Hi Rich, my name is Sarah with KOHLER Customer Service. We're glad to help find an answer to your question. Please contact our Customer Service team for help with this product. They can be reached at 1-800-456-4537 (M-F; 8am-5pm CST). Thank you for choosing KOHLER
by|May 4, 2023
Q:How long does the threaded connector pipe ( nipple pipe) need to be to install with a fished wall.
by|Jul 12, 2017
2 Answers
Answer This Question
A: Hi Lidia, my name is Sarah with Kohler Co. I am glad to answer your question. For a slip-fit spout, a 5/8" OD tube
must extend 4-3/4" (12.1 cm)
beyond the finished wall.
For a threaded spout, a 1/2" NPT pipe
must extend 4-3/4" (12.1 cm)
beyond finished wall. Thank you for choosing KOHLER.
by|May 4, 2023
1 found this answer helpful
A: No. The faucet end does not need to be threaded, you can use direct 1/2-inch copper pipe direct to the faucet.
by|May 6, 2023
Q:Is the length of this non-diverter bath spout 7 1/2-inches from the back (where it is placed against the wall) to the very tip? Or is the length measured on the curve of the spout? I need to know the exact measurement from the wall out in a vertical measurement. I want to make sure this isn't going to look too far out from the wall.
by|Apr 25, 2017
1 Answer
Answer This Question
A: Hello, my name is Sarah with Kohler Co. I am glad to answer your question. Yes, the 7-1/2" is measured from the wall to the center of the aerator where the water flows out. Thank you for choosing KOHLER.
by|Apr 25, 2017
Q:I am planning on using K-T15225-4-CP lever handles with the K-302-K-NA valve and want to make sure this spout will connect correctly. Thank you for your help.
by|Oct 10, 2016
1 Answer
Answer This Question
A: NYFRANK, this is Laura with Kohler Co. I am happy to assist you with your faucet/valve question. Yes, this faucet trim kit is compatible with the K-302 valve.
Please work with your local The Home Depot for pricing and availability on this product. Thank you for choosing The Bold Look of KOHLER.
by|May 4, 2023
Q:can I get this model with a diverter
by|Oct 19, 2015
1 Answer
Answer This Question
A: Hello, my name is Leah with KOHLER Customer Service. I am happy to assist you with your bath spout question.
I apologize you were unable to find the information you were looking for. The Alteo bath spout with a diverter is model 45131-**.
Please work with your local Home Depot for pricing and availability on any selected product.
Thank you for choosing the Bold Look of KOHLER.