#1 Home Improvement Retailer

Questions and Answers for KOHLER Tresham 25.5 in. X 19 in. Vitreous China Single Basin Vanity Top in Ice Grey

Internet #203780939

Model #K-2979-1-95

Questions & Answers

25Questions
caret
Q:I also,need a white vanity with some draws for this vanity top The size would be 25"
by|Mar 6, 2017
1 Answer
Answer This Question

A:  Hello, my name is Sarah with Kohler Customer Service. I'm glad to answer your question. This bathroom sink is designed for installation to the K-2604 vanity or with any other 24″ (610 mm) x 18″ (457mm) vanity. Thank you for choosing KOHLER.

by|May 4, 2023
    caret
    Q:My current vanity is 23 1/2 wide. From the picture it looks like the sides on the bottom are indented. Will this top be able to sit in my current vanity? Also because for plumbing the vanity is exactly 36" from floor to top of vanity. If I add this top what will that measure? I'm worried it'll be too tall.
    by|Feb 17, 2017
    1 Answer
    Answer This Question

    A:  Hi Laurie, my name is Sarah with Kohler Customer Service. I'm glad to answer your question. This sink is meant to be installed on a 23-3/4" vanity. The top will add an additional 2-7/16" in height on the front and 3-1/16" in height on the back. Thank you for choosing The Bold Look of KOHLER.

    by|May 4, 2023
      caret
      Q:What is the total height of the vanity top with the Tresham 32 1/2" vanity? Aren't most vanities 34" now?
      by|Dec 22, 2016
      3 Answers
      Answer This Question

      A:  Hi, this is Laura with Kohler Co. I am happy to assist you with your question. If paired with vanity K-2604, the combined height of the vanity and vanity top is 34-15/16" at the front of the unit and 35-9/16" at the rear of the unit. Please work with your local The Home Depot for pricing and availability on this product. Thank you for choosing KOHLER.

      by|May 4, 2023

        A:  The edge of this vanity top is 2.4375 inches. It is recommended to use with standard 24 inch by 18 inch vanities.

        by|May 4, 2023

          A:  It's more like 35/36--that's why we decided on a composite/cultured sink---sleeker/slimmer lines--especially in our small new upstairs' bathroom.

          by|May 4, 2023
            caret
            Q:We need to replace a vanity top which is 55" x 22". Do you have a single sink vanity top in biscuit ( to match our new Highline EB toilet )??
            by|Sep 3, 2016
            1 Answer
            Answer This Question

            A:  Hello, my name is Aimee with Kohler Customer Service. I am happy to assist you with your vanity top question. Model 2979-1-96 is not offered in a 55”. The largest vanity top that we offer comes in a 49”x 22-3/8”. For additional assistance on this inquiry, please contact our Customer Care Center at 1-800-4KOHLER (1-800-456-4537). Thank you for choosing the Bold Look of KOHLER.

            by|Oct 27, 2023
              caret
              Q:Since sink has a very flat bottom, how well does this drain? Does water pool near drain instead of draining out?
              by|Apr 26, 2016
              1 Answer
              Answer This Question

              A:  This has not issues with draining.

              by|May 3, 2023
                caret
                Q:The webpage for this vanity doesn't list the option of 4" spread holes for faucets, but the spec sheet indiciates that K-2979-4 is a 4" spread. Do you have this vanity top with a 4" spread?
                by|Apr 25, 2016
                1 Answer
                Answer This Question

                A:  Hello, my name is Brenda with Kohler Customer Service. I am happy to assist you with your vanity question. The Tresham® vanity-top bathroom sink with 4" centerset faucet holes is model number 2979-4-0(white). This is also offered in many other colors as well. Please work with your local Home Depot for pricing and availability on this product. Thank you for choosing the Bold Look of KOHLER.

                by|May 3, 2023
                  caret
                  Q:I have read that the bottom of the sink is perfectly flat and tends to pool water around the drain instead of everything gong down the drain. It was said that you need to direct water with your hand while the faucet is running to make sure the water does not sit in the bottom of the sink. Has anyone experienced this?
                  by|Apr 25, 2016
                  1 Answer
                  Answer This Question

                  A:  Hello, my name is Brenda with Kohler Customer Service. I am happy to assist you with your sink question. I do apologize, we have not received feedback concerning the pooling of water at the bottom of the sink. Kohler sinks are made with a small pitch (approximately 1 degree), to divert any pooling at the bottom of flat sinks. For additional assistance on this inquiry, please contact our Customer Care Center at 1-800-4KOHLER (1-800-456-4537). Thank you for choosing the Bold Look of KOHLER.

                  by|Mar 8, 2024
                    1 found this answer helpful
                    caret
                    Q:My inside cabinet dimensions are 19.24" W by 14.5" D. Would the basin of this sink fit into that opening? The Outside dimensions are 22.75 " W By 18" D. From the specs posted on the home depot web page the front would over hang by an 1" and the sides 1 1/8" on the sides.
                    by|Feb 20, 2016
                    1 Answer
                    Answer This Question

                    A:  Dear Valued Home Depot Customer, We reached out to MFG for more information and below is their response. “ Hello, my name is Carol with KOHLER Customer Service. I am happy to assist you with your sink dimension question. The bowl area off model number 2979-4-0 is 19 1/16" Length x 10 1/2" wide and is 5 1/4" deep. The recommended cut out should be 21 13/16" x 16 11/16" For additional assistance on this inquiry, please contact our Customer Care Center at 1-800-4KOHLER. (1-800-456-4537) Thank you for your inquiry and choosing the Bold Look of KOHLER."

                    by|May 3, 2023
                    caret
                    Q:What is the minimum cut out size for this?
                    by|Jan 23, 2016
                    1 Answer
                    Answer This Question

                    A:  Hello, my name is Aimee with KOHLER Customer Service. I am happy to assist you with your sink question. I apologize you were unable to find the information you were looking for. If you would like to receive a free of charge copy of the cut-out template to compare to your existing opening, please contact 1-800-456-4537 for assistance ordering one. Additionally if you have CAD programming available to you, the cut out can be downloaded at www.us.kohler.com. I apologize we do not provide cut out dimensions in any other manner to avoid any installation errors. Thank you for choosing the Bold Look of KOHLER

                    by|Oct 27, 2023
                      caret
                      Q:The entire wall in my bathroom is tile.
                      by|Nov 3, 2015
                      3 Answers
                      Answer This Question

                      A:  does not require one, caulk would do between wall and sink, but could add tile backsplash.

                      by|May 4, 2023

                      A:  Hello, my name is Andrea with Kohler Customer Service. I am happy to assist you with your back splash question. A backsplash is not required when installing model # 2979-4-0 on 24" vanity. However you will need to run a 1/8″ (3 mm) bead of siliconized acrylic caulk along the top edge of the sink where it contacts the finished wall. Please work with your local Home Depot for pricing and availability on this product. Thank you for choosing the Bold Look of KOHLER

                      by|May 3, 2023

                        A:  no it doesn't require a back splash, maybe just caulk where sink meets wall.

                        by|May 4, 2023