Q:if using two 34 x 80 doors together what would my rough opening need to be to allow proper open/shut
by|May 12, 2020
1 Answer
Answer This Question
A: For two 34 x 80 bi-fold door, you would need a rough opening of 68-1/2 x 81-1/2.If it is two of the 24 x 80 bi-fold doors, you would need a rough opening of 48-1/2 x 81-1/2. Thank you for your inquiry.
by|May 14, 2020
Q:I need 2 of these doors how do I special order this doors
by|Apr 29, 2020
1 Answer
Answer This Question
A: Please visit your local HOME DEPOT for special ordering and regional availability options. Thank you for your question.
by|Apr 30, 2020
Q:I lost the mounting hardware and instructions for the door I purchased. Can I purchase these items separately? 30x80
by|Feb 29, 2020
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Mar 2, 2020
Q:I have an width opening that is 60 3/8" x 80 7/8" (height) if I buy two 30 in. x 80in. will these work for my closet?
by|Jan 29, 2020
2 Answers
Answer This Question
A: Probably, but you'll likely have to trim them a bit. The mounting assembly requires some clearance for the corner of the door as it pivots on opening. It winds up being close to half an inch on each side as a minimum.
by|Mar 3, 2020
A: No, the Craftsman White Painted Smooth Molded Composite MDF Closet Bi-Fold Door will not fit with the rough opening you have. JELD-WEN may be able to provide a custom order for a bi-fold unit to fit the opening you have. Please see your local Home Depot store for ordering and availability. Thank you for letting us assist you today.
by|Jan 29, 2020
Q:Can these be cut shorter the opening I have is only 73 in.
by|Sep 24, 2019
1 Answer
Answer This Question
A: Yes, these can be cut shorter.
by|Nov 13, 2019
1 found this answer helpful
Q:I am building a new home. I need to know what the PRE drywall rough opening should be for a double bi-fold of 36" each?
Right now my rough opening is right at 72" or 6ft. Thank you.
by|Aug 15, 2019
2 Answers
Answer This Question
A: The finished opening should be 72". I recommend you put the corner bead on the front and back of the stud and mud between. (Yes, we've done this and it holds just fine after painting.) Your other options are to enlarge the rough-in or trim the doors. Good luck.
by|Sep 3, 2019
A: Just guessing that a 36" bifold door comes shipped at 35.5". My 4 32" doors came in at 31.5" each. With the 1/2" gap clearance needed that is a 32" finished opening. If I were installing (2) 36", I would rough-frame to a 73.5" opening. Adding a 3/4" jamb on each side brings the finished opening to 72". The doors can be trimmed on each edge by 1/4" (that would be 1" total across the double-wide) so better to be a bit tight than a bit loose.
by|Aug 17, 2019
Q:to install a 24 in. x 80 in. Smooth 3-Panel Craftsman Hollow Core Molded Interior Closet Composite Bi-Fold Door (actually, 2 of them for 48" door. how much horizontal space is needed (how much total clearance)?
by|Apr 29, 2019
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Nov 17, 2019
Q:Is the door perimeter banded with solid wood such as DFL or pine, or is it banded with MDF? Exactly how wide is the banding around the door?
by|Mar 7, 2019
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Mar 9, 2019
Q:What is the exact width of the door closed? One review claims a 24" wide door is in fact only 23."
by|Mar 7, 2019
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Aug 16, 2019
Q:Is a Craftsman style Jeld Wen bifold closet composite door available at 82” to 84”? The 79” (80” common) does not fit my 82” rough opening.
by|Sep 4, 2018
1 Answer
Answer This Question
A: No, JELD-WEN does not offer the Craftsman Desert Sand Painted Smooth Molded Composite MDF Closet Bi-fold Door. We may be able to provide a custom order in a different style for the height you are looking for, please see your local Home Depot store for ordering and availability. Thank you for letting us assist you today.