Questions and Answers for InSinkErator Sink-Top Air Switch Push Button in Gloss Black for InSinkErator Garbage Disposal

A:  Hi Chuck! Thanks for reaching out to us. You're probably surprised that your sink-top switch does not activate your disposal. The unit may have overheated and must be reset. Here's a brief reference: https://bit.ly/2CamA2e. If that doesn't work, please contact us at https://support.insinkerator.com/app/ask to find out what exactly is causing it.

A:  Hello Drew! Thanks for your question. Based on what you've described, it appears that you've installed it correctly. The stainless-steel washer and rubber gasket are placed between the push button and the top of sink counter. For your reference, you can view step 2 of the installation guide at this link: https://bit.ly/2Lf8ZOw. If you require further help, feel free to contact us via https://support.insinkerator.com/app/ask.

A:  The air button sits on top of the countertop.

A:  Hello Razmini, thank you for your question. Yes, the ring and the push button sit flush on the countertop when installed properly. Check out this video for reference: https://www.youtube.com/watch?v=-XeWeJdX0eY.

A:  Hi Linda, we're glad you asked. Yes, you will need the SinkTop Switch Dual Outlet Kit if you want to convert from a wall switch. The model is STS-OOSN (includes 1 satin nickel push button): https://thd.co/3K0irAH. You can purchase the push button separately if you want to use a different finish. If your existing disposer is not corded, you'll need to purchase a power cord kit, model CRD-00.

A:  This button works with air pressure. You need the kit. And you need an outlet under the sink. 

A:  Thank you for your question, Linda. The SinkTop Switch is only an alternative to a wall switch. There's no need to convert if you already have a wall switch installed.

A:  No. You must be a "kit" for this product.

A:  Vacuum switch. No wires involved. Just the plunger device. 

A:  No this is just the cap by itself 

A:  Hi Jose! We're glad you've reached out to us. This is only a button. If you need the sink-top switch system, the part numbers are 76696 for a chrome and white finish included and 76696A-ISE for a satin nickel finish. Other button finishes are sold separately. For your reference, here's its spec sheet: https://bit.ly/2HLrVSP. Thanks!

A:  Hello Cheryl! We’re glad you’ve reached out to us. We can imagine the difficulty you’re experiencing whenever the button is getting stuck. With this, it is possible that the threaded plastic piece that’s holding the button is broken. To further assist you with its replacement, please contact us via https://support.insinkerator.com/app/ask. Thank you!

A:  Plastic

A:  Hi Beck, thanks for sending your question. The button and bezel (trim around the button) are molded plastic with a brass plated sheathing over the plastic.

A:  Hi, thanks for reaching out. The Sink-Top Air Switch Push Button does not have a warranty, but we'd be happy to assist. You can reach us at https://support.insinkerator.com/app/ask.

A:  Hi Rehmann, thanks for your question. Yes, this is compatible with any InSinkErator garbage disposer. The Sink-Top Air Switch Push Button only includes the button and the cover that goes around the sink top switch button. If you want to use a SinkTop Switch, you'll need to buy the whole kit and this button can be used to replace the button that's included in the SinkTop Switch Kit.