Q:I already have an insinkerstor that dispenses hot water only. I have a separate faucet for filtered water. Can I just buy this Faucet if I want the two to connect to one faucet or do I have to buy a whole unit all over again?
by|Dec 19, 2022
1 Answer
Answer This Question
A: Hi Soli, thanks for your question. You can just buy the Hot and Cold Indulge faucet and still use your existing tank. Both hot and cold will also be filtered if you connect your filtration system to it. I hope this helps.
by|Mar 26, 2023
Q:Does the brushed bronze color match delta?s champagne bronze?
by|Nov 24, 2022
1 Answer
Answer This Question
A: Hello ACAC, thanks for your interest in our products. The brushed bronze finish matches with Delta's champagne bronze. You can refer to this link for the finish matching guide: https://bit.ly/3V59Y3z. We hope this helps.
by|Jun 5, 2023
1 found this answer helpful
Q:The faucet on my Indulge 11000 series hot water dispenser is loose. What tool can I use to get up under the sink and tighten the hex nut?
by|Oct 29, 2022
0 Answer
Answer This Question
Q:I just had the faucet replaced on this model. The old version allowed the cold handle to function if you pulled it forward or pushed it backwards. The new one (just installed) doesn?t work if you pull the cold forward. Is this broken or how it functions?
by|Oct 13, 2022
1 Answer
Answer This Question
A: Hi douglux, thanks for reaching out! The faucet handles are meant to be pushed back. If pulled forward, it may dispense water, but will have poor flow or make noise as the valve is not being fully opened.
by|Oct 14, 2022
Q:I have an older Insinkerator model which includes the tank and faucet (H-990W-5) new in the box, never used. Can I use the water tank that I already have with this new Indulge Contemporary faucet?
by|Jul 10, 2022
1 Answer
Answer This Question
A: Hi Sandy, thanks for reaching out! The tank on model H-990W-5 is not compatible with our current faucets because the inlet port on the old tank is different. You'll need to pair it with newer tank models like the HWT-F1000S (with filtration system), or the HWT-00 (tank only).
by|Jul 11, 2022
Q:InSinkErator Please help >We have the InSinkErator 2-handle faucet. It is now leaking at base of hot water handle and dripping at the faucet. Any solution or must we spend $475. on an entirely new fixture? Faucet is 5 yrs old.
by|Apr 20, 2022
2 Answers
Answer This Question
A: If you have hard water, it's likely there is calcium build inside the valve. There are no gaskets inside. The levers come out the top by carefully unscrewing the beauty ring. Mine was 10 years only when it failed so I bouth a new one. Then figures out how to disassemble it.
by|Mar 24, 2023
1 found this answer helpful
A: Hi Queene, we're sorry to hear about this. If the leak is coming from the base of the handle, your entire faucet will need to be replaced. To assist you further, please contact us at https://support.insinkerator.com/app/ask with your product's serial number.
by|Apr 22, 2022
Q:is the neck piece replaceable
by|Mar 10, 2022
1 Answer
Answer This Question
A: Hi Rocky, we're sorry to hear about this. The only part of a hot water dispenser that is replaceable is the aerator. No other parts are sold separately and are not designed to be replaced. If you need further assistance, please contact us at https://support.insinkerator.com/app/ask.
by|Mar 11, 2022
Q:can i just buy the hot handle for this model,if so where?
by|Jan 28, 2022
1 Answer
Answer This Question
A: Hi Alex, thanks for your question. Handles are not sold separately and are not designed to be replaced. The only part that is replaceable is the aerator.
by|Jan 28, 2022
Q:I have a SST-08068867276 Model F60IR. I assume they don't make these any more. Is the F-GN1100C heater compatible with this model?
by|Dec 3, 2021
1 Answer
Answer This Question
A: Hi Vonnie! Yes, your existing water heater and filtration system will be compatible with this dispenser.
by|Dec 7, 2021
Q:will this faucet work with the Insinkerator HWT-F1000S? Looking to replace my black faucet with the gold one. Thanks!
by|Nov 27, 2021
1 Answer
Answer This Question
A: Hello Kevin! Yes, this faucet will work with HWT-F1000S.