Questions and Answers for Impact Plus 72 in. x 80 in. Smooth Flush Solid Core Espresso MDF Interior Closet Sliding Door with Matching Trim

A:  Bruce, We don't recommend it, but you can cut the height and would be cheaper option than a custom door. Just make sure whomever does it is skilled and has the right tools. You will need to remove, cut, and recreate the hardware preps with a drill bit, and replace the hardware on the top edges. Thank you

A:  Grand, The triple track is not currently available here. You will need to reach out to us at 631-414-7725 or sales@CustomDoorandMirror.com and we can get you the info you need. Thank you

A:  Arman, We have some options, please reach out to us at Sales@CustomDoorandMirror.com or 631-414-7725 and ask for customer service, we apologize for any inconvenience.

A:  MarkinLA, generally speaking our doors come in pairs only. Please reach out to us by email at Sales@CustomDoorandMirror.com or 631-414-7725 if you want to explore additional options. Thank you.

A:  ellen, Yes you will just need to rout out the area where you want to install the recessed pulls. Usually the hardware comes with a template for the routing. Keep an eye out in the near future as we are introducing a whole new line of recessed pull options for our MDF doors. Thank you.

A:  Below is a link to the installation instructions, you will have to remove the carpet where the bottom track is installed. https://images.thdstatic.com/catalog/pdfImages/f9/f9e4ee00-21f2-413f-88c2-8d02dfc75fac.pdf Mike

A:  MamaD, The weight listed is for the entire unit. Just remember that once they are installed, they wont feel like you are moving a 45 pound panel thanks to our patented hardware that provides silky smooth operation. The weight is a bonus as you will feel the quality and you won't feel like you have cheap light hollow core doors in your home.Thank you.

A:  Kbw9, This is a tough question as several factors are at play. If it is a low-pile carpet, you definitely should go over the carpet and you can use masonry screws or even use an adhesive. If its a high-pile or "shag" carpet you have to decide if its will be too soft to properly secure the track to the carpet , then you may want cut the carpet to the edge of the track (on both sides if your going into the closet) and then go right to the floor with screws or adhesive.