A: The total extended length from torsion bar to tip of rod is 19.409", rod alone is 7.75". Max opening angle is 78 degrees. For more detailed photo please visit http://help.idealinc.com/article/765-sk3015-specifications
by|Jan 30, 2023
Q:What is the purpose of the torsion bar? How do I know if I need it? I have wood frame screen door with spring hinges. Need something to close door smoothly and no slamming.
by|Mar 16, 2019
2 Answers
Answer This Question
A: The door closer SK3015 is for some very heavy doors (60 kg plus), or some special configured doors. You should replace with the same type door closer if possible unless you were not satisfied with the original setup.
by|Jun 6, 2023
1 found this answer helpful
A: Works as expected.
by|Sep 21, 2021
Q:What is the length of the full stroke (open/close)?
by|Apr 27, 2018
1 Answer
Answer This Question
A: The SK3015 door closer will open to about 85 degree. The center rod will extend by about 6.5".
by|Oct 31, 2019
1 found this answer helpful
Q:i have the deluxe heavy duty screen door closer and cant figure out how to install it
by|May 5, 2016
2 Answers
Answer This Question
A: You can find complete instructions for installing the door closer here: https://www.idealinc.com/door-and-window-hardware/storm-and-screen-door-hardware/door-closers/sk4730-quick-hold-door-closer-heavy-duty
by|Jan 6, 2024
1 found this answer helpful
A: Torsion bar mounts to door. Bracket mounts to hinge side door jamb.
Close door closer is to be mounted to. Take a pin and attach shaft to bracket. With closer retracted hold against door at whatever height you’re going to mount it at. Place bracket against door jamb. Mark holes, drill and attach with screws. Place torsion bar against door. Mark holes, drill and attach torsion bar to door. Adjust screw for closing speed.