Q:Will this socket work with a 1/2 drive, 24 inch breaker bar to remove a water heater anode rod?
by|Sep 16, 2019
5 Answers
Answer This Question
A: Yes
by|Dec 31, 2019
A: What I used it for.
by|Sep 16, 2019
A: Yes, that's what I used it for and it worked great.
by|Sep 25, 2019
A: It should. It is a beast of a socket but if the bar is long enough it will break it loose.
by|Apr 29, 2020
A: Yes. But make sure you release the pressure in the water line or you will take a hot water shower
by|Feb 6, 2020
1 found this answer helpful
Q:how deep is it
by|Feb 24, 2018
4 Answers
Answer This Question
A: Deep enough that I didn't need to use an extension.
by|Jan 16, 2021
A: This socket is 5" deep.
by|Jan 16, 2021
A: 1-1/4" deep
by|Sep 21, 2021
A: The outside measurement, end to end, is 3 1/16".
The inside depth measurement is 2 5/16"
by|Aug 25, 2022
3 found this answer helpful
Q:what are the actual dimensions of this socket. The ones listed in the description don't seem to add up correctly.
by|Nov 16, 2017
2 Answers
Answer This Question
A: Hi TimAllen, the dimension shown on the website are shipping dimension, which include the hang tag. Here are the approx. dimensions for just the socket. Height - 3.026 in., Width - 1.493 in., Height - 1.493 in.
by|Jan 5, 2021
2 found this answer helpful
A: This is 5.12 in. D, 1.38 in. H, and 2.36 in. W.
by|Nov 17, 2020
Q:I have never seen a 1-1/18 socket before. Is this part of a new standard of measurement?
by|May 14, 2017
1 Answer
Answer This Question
A: Vinny, good eye, this is a 1-1/8th socket. Sorry for they typo
by|Aug 25, 2022
1 found this answer helpful
Q:What is the outer diameter of the 5/8" deep well socket?
by|Mar 2, 2017
2 Answers
Answer This Question
A: About 1/32 to 1/16 bigger around than 5/8.
by|Apr 27, 2022
A: Clyde, the outside diameter of this socket measures .86 inches.
by|Jan 28, 2019
2 found this answer helpful
Q:will this socket work for a Honda 400 ex 2001 to take out a sparkplug because it request a 18mm socket but it got to be skinny cause a standard one wont fit
by|Nov 13, 2016
1 Answer
Answer This Question
A: ovheeko, This is a standard style 18mm spark plug socket. It sounds like you are looking for a thin wall style spark plug socket which is much more of a speciality tool. We ufortunally do manufacture thin spark plug sockets.
by|Jan 28, 2019
1 found this answer helpful
Q:I've researched as much as i can to appropriately find the full line of sockets that i need but to no avail. I purchased a master set, and it did not have the full spectrum of sockets (which is understandable) within the set. I'm missing certain sockets such as 1/2 drive metric 6-point deep well sockets, or 3/8 drive standard 12-point deep well sockets. This is very fustrating and unproffessional if husky did not make full sets. I've received no luck from stores and information on the company is limited i would be grateful to know if these sockets and others like it are made that Aren't Impact Sockets.
by|Jun 16, 2015
3 Answers
Answer This Question
A: I think that would be a lot of work, I think.
by|Jan 28, 2019
A: they handle gearwrench items check this out and see if they have them.
by|May 3, 2019
A: Thank you for your recent inquiry with The Home Depot. To determine availability of specific parts, we invite you to browse our website. Unfortunately, we are not privy to the manufacturing decisions of our vendor. I believe it would be best to reach out to Husky for specific questions. Their customer service department can be reached at 1-877-527-0313, option 4.