Questions and Answers for Hunter Hatherton 46 in. Indoor New Bronze Ceiling Fan with Light Kit

A:  Hello Mike, to change the direction of the airflow, the reverse switch is located on the side of the switch housing. Slide the reversing switch to the opposite side. Please refer to page 15 in the owner's manual. ~Michelle https://images.thdstatic.com/catalog/pdfImages/8e/8e7a4c48-24c7-4b21-aef7-934fa2e6a2b2.pdf

A:  Hello, the CFM on high for this fan is 3113, and the average is 1981. If you need any further help, please reach out to us at 1-888-830-1326 or Customercare@hunterfan.com. ~Michelle

A:  You can wire it up using a regular light switch to turn both the fan and the light on. You have to control the fan speed from the pull chain. You can also have it wired with two switches, one dedicated for the fan and one dedicated for the light (again the fan speed is controlled by the pull chain). This is how I have mine wired and it works fine. I am using standard light switches. You could probably use dimmer switches too (which may allow you to control the fan speed as well as dim the lights) but you may need to check the specifications on the dimmer switch to see if it compatible. An electrician will know what to do.

A:  Hello Nan, we would only recommend you use Hunter wall switches with our fans. Unfortunately, our fans are not compatible with some brands of wall switches. ~Stacy

A:  Hunter has wall switches for the fans. You may have to rewire the wall switch gang box to have the proper functionality i.e., light and fan to work from the same switch. There are also remote controllers. Check the site URL below: https://www.homedepot.com/b/Lighting-Ceiling-Fan-Parts-Ceiling-Fan-Switches/Wired/N-5yc1vZ1z18i3eZ1z13gli?storeSelection=

A:  Yes you can control the fan and light with a wall switch. This is how l had our fan installed and very please.

A:  Hello, this fan can be controlled with on/off switches on the wall.~~Stacy

A:  I can confirm that this fan uses a WhisperWind motor. This fan is very quiet. ~Kevin

A:  We have ours for about 3 years now. Never had any problems and it's very quiet.

A:  I used 40 to 60 watts--not 100. Though I think the led in a 15-25 watt might be better

A:  The light kit comes with three 60 watt incandescent bulbs. They are the candelabra base bulbs. They light up the room pretty good.

A:  Yes and 60 watts

A:  This fan's specifications has a minor error. The fan comes with LED bulbs included and is only compatible with LED or CFL bulbs up to 14 watts per socket. ~Kevin

A:  180-watt light fixture using three 60-watt candelabra base (E-12) incandescent bulbs included; can be installed without light kit