Questions and Answers for HDX Pneumatic Finish and Trim Nailer and Staplers Combo Kit with Canvas Bag and Fasteners (3-Piece)

A:  Any brand. As in any brands which are of the same variety and arrangement (Porter Cable, etc.) Even some cheap import non-brands.

A:  I bought and used some Bostich 18 Guage with no problem...

A:  It will accept the type of brad heads you desire.

A:  Yes, You get all THREE pictured. A small bag (too small for practicality), and a few strips of fasteners.

A:  Yes, you do. Along with some staples and nails, a carrying case (that is very tight but adequate), and a small bottle of lube oil.

A:  Yes, you get all three pieces and with sample loads and Air Tool oil, nicely packaged in a sturdy bag. All 3 have 1/4 inlet pre-attached. Simply put, these tools are ready for actions right out of the bag.

A:  Yes. You get the 3 nailer/staplers, nails & staples for each gun and a canvas bag for all of it.

A:  Yes

A:  Yes. It's a pneumatic tool, meaning you must have pressurized air to operate.

A:  Yes, you will need an air compressor and a hose. You can use a smaller 3 gallon one if you like. These nailers are pretty small, so they will let you fire about 20 at a time before it has to air up. I prefer smaller compressors, and light coiled, plastic hoses for light tools such as these. Make sure your hose has a quick connect coupler for ease of changing out the tools from one to another.

A:  Yes. A small pancake compressor would be enough.

A:  All pneumatic tools get their power through compressor, so yes, a compressor is a must for these. All in all, you will need a compressor, a hose and quick connect couplers. I've been using it with Husky 33 Gal. and what a great team they make together.

A:  Yes. Pneumatic means it uses air for power. Also look at the rear of the tool. It has the end to accept the air hose.