Q:Currently I have a fan on a wall switch. Can I run a wire from the fan to one of the 4" light and daisy chain to the other 3? I realize they will all come on but I can turn the fan off by pull chain.
by|Aug 13, 2023
1 Answer
Answer This Question
A: Please this question can be better assisted by local electrician.
by|Dec 19, 2023
Q:Can I use the Halo 6" lights on the driver junction box that came with the 4" versions?
by|Jul 24, 2023
1 Answer
Answer This Question
A: Please not you cannot use the 6"fixture with 4" driver box. Each fixture comes with Junction box.
by|Sep 18, 2023
1 found this answer helpful
Q:Installed a Leviton slide dimmer switch lights are popping when turned on?
by|Jul 19, 2023
1 Answer
Answer This Question
A: The popping is purely mechanical. There is a tin plate underneath the lens that is expanding when heating up and pops outwards. There is no risk of overheating or premature failure for this fixture.
by|Feb 13, 2024
1 found this answer helpful
Q:I have sunco recessed led 4inch lighting. For some reason.They keep burning out on me and i have to constantly replace them.I checked the ballast and it is not the ballast. Are the connectors on the HALO recessed lights able to connect to another ballast?
by|Jul 14, 2023
0 Answer
Answer This Question
Q:Is the junction box supposed to be hot? It is hot after the lights are on for awhile, I know this because I went to paint the ceiling and let the light ? dangle? so I could paint and I noticed the junction box was hot when removing it from the ceiling.
by|Jul 10, 2023
1 Answer
Answer This Question
A: Please note the junction box and fixture will be hot to the touch. The wiring and component above the ceiling are rated for 90°C.
by|Jul 10, 2023
Q:I currently have PAR20 lights installed in the ceiling. Can I easily replace them with this product?
by|Jul 3, 2023
1 Answer
Answer This Question
A: Please note HLBSL4069FS351EMWR can be installed in 3/8” to 5/8” thick ceilings Round ceiling cutout. Refer the below link for more information.
https://www.cooperlighting.com/api/assets/v1/file/CLS/content/23bd1668d4d44416939bad41007de845/halo-hlbsl4-module-spec_hlbsl4069fs351emwr
by|Jul 4, 2023
Q:do these come in a soft offwhite vs a harsh bright white
by|Jul 1, 2023
1 Answer
Answer This Question
A: Please refer the below link for more information.
https://www.cooperlighting.com/api/assets/v1/file/CLS/content/23bd1668d4d44416939bad41007de845/halo-hlbsl4-module-spec_hlbsl4069fs231emwr
by|Jul 11, 2023
1 found this answer helpful
Q:What is the lumen output for each of these fixtures?
by|Jun 29, 2023
1 Answer
Answer This Question
A: Please note HLBSL4069FS351EMWR has 650 lumens output for each fixture, refer the link below for more information.
https://www.cooperlighting.com/api/assets/v1/file/CLS/content/23bd1668d4d44416939bad41007de845/halo-hlbsl4-module-spec_hlbsl4069fs351emwr
by|Sep 18, 2023
1 found this answer helpful
Q:Are these dimmable
by|Jun 27, 2023
2 Answers
Answer This Question
A: yes, with led dimmer.
by|Feb 24, 2024
1 found this answer helpful
A: Yes HLBSL6099FS35 is dimmable, refer the below link for more details,
https://images.thdstatic.com/catalog/pdfImages/59/59104303-442a-48bf-8955-0f1e3f3a39c9.pdf
by|Nov 22, 2023
Q:Can they be used with aluminum wiring?
by|Jun 19, 2023
1 Answer
Answer This Question
A: Please note HLBSL4069FS351EMWR is Listed for (6) #12 AWG 90˚ C splice conductors, 2-in, 2-out plus (2) ground (4) ½” conduit pry-outs • Accepts 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian NM cable, refer the below link for more details.
https://www.cooperlighting.com/api/assets/v1/file/CLS/content/23bd1668d4d44416939bad41007de845/halo-hlbsl4-module-spec_hlbsl4069fs351emwr