Q:What type of nail can I use to go through Hardie Board siding to attached the sagging fascia back into place?
by|Sep 22, 2023
1 Answer
Answer This Question
A: You will want to use whatever fastener you would to secure the fascia board. Please refer to your local building code for the specific fastener for fascia board.
by|Sep 25, 2023
Q:Can I use these nails to fix the wood at the bottom of my couch? The wood broke.
by|Jan 16, 2023
1 Answer
Answer This Question
A: This nail is labeled for use on panel boards and cannot be recommended for use on a couch.
by|Jan 17, 2023
Q:Can I use these nails to fix the wood at the bottom of my couch? The wood broke.
by|Jan 16, 2023
1 Answer
Answer This Question
A: This nail is labeled for use on panel boards and cannot be recommended for use on a couch.
by|Jan 17, 2023
Q:Can I use these nails to attach shiplap boards to existing wood paneling? Thank you
by|Nov 5, 2022
3 Answers
Answer This Question
A: Sorry but I miss read your question. You need a nail that is about an inch longer than the thickness of the ship lap
by|Nov 7, 2022
A: Those are probably much larger then you need. 1 1/2 - 1 3/4 18 gauge (nail gun) will work fine.
by|Aug 11, 2023
1 found this answer helpful
A: You can use this nail, however, you will need to be sure to use the proper size, depending on the thickness of the board.
by|Nov 7, 2022
Q:What kind of nail do I need to put up your white tileboard I just
purchased inside my new shower stall?
by|Nov 23, 2021
1 Answer
Answer This Question
A: Please check with the manufacturers installation guidelines for the correct nails to use.
by|Nov 24, 2021
Q:I plan on attaching paneling to steele studs. Can this nail be used or what nail do you suggest?
by|May 23, 2021
1 Answer
Answer This Question
A: No. You should use a screw or nut and bolt.
by|May 29, 2021
Q:Can these nails be used in nail gun?
by|Jun 6, 2020
2 Answers
Answer This Question
A: I doubt it due to not being connected to each other these are loose nails.
by|Jun 14, 2020
A: N/A
by|Mar 31, 2021
Q:can i use these to make a shed
by|May 30, 2020
2 Answers
Answer This Question
A: No, these are used for paneling or other lightweight materials. Definitely not a framing nail.
by|Jun 6, 2020
A: you could use these for applying siding or roof sheathing, but they are not long enough for 2 x 4 framing for structure.