Q:Year 2 land lost the directions! Does the "clock" on this thing run "counterclockwise?" Is 6:00 PM on the left side in white, right before the 7 in blue?
by|Dec 11, 2016
1 Answer
Answer This Question
A: Hi VanZandt, Great question and Thank you for your interest in our GE Big Button Timer / Model: 15076! This timer does not function counter clockwise. Push down the pins (ensuring all pins are pulled up first), each representing a 30-minute interval, for the times you want your electrical device to stay on. Make sure to rotate the dial "clockwise" to match the center arrow with the current time. If you have any further questions, we encourage you to respond or contact our Customer Support through phone or email. Thank you, Jasco Tech Support (Manufacturer)
by|May 4, 2023
Q:The timer is easy to use but after a short time of use (several months) it has started to buzz. Is there some way to alleviate the buzzing noise?
by|Nov 19, 2016
1 Answer
Answer This Question
A: Hello Ady, Thank you for reaching out to us and for your interest in our Plug-In Big Button Timer. This is unusual, the timer should not make a buzzing noise. Please give us call so we can gather more information and get this resolved for you. If you have any further questions, we encourage you to respond or contact our Consumer Service through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
by|May 4, 2023
Q:i set timer for 7 am to 7 pm ,,,, after it turn on on 7 am it will go off at 7:30 and come back on after 7 pm. why it wrong with timer? it is defiant timer model 544 068.
by|Sep 26, 2016
1 Answer
Answer This Question
A: Hello mike, Great question and Thank you for your interest in our Plug-In Big Button Timer. To set this timer you will need to pull all pins up, and then push down the pins for the timeframe you want the device to be active. Then, rotate the timer’s dial clockwise until the pointer on the face of the dial points to the current time of day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted with a gray background. Lastly, set the master switch to “Timer On” position. If you have any further questions, we encourage you to respond or contact our Consumer Service through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
by|May 4, 2023
Q:Do I use outlet on or timer on
by|Sep 22, 2016
1 Answer
Answer This Question
A: Hello Alice, Great question and Thank you for your interest in our Plug-In Big Button Timer. Yes, this timer plugs into a polarized outlet and your lamp plugs into the timer. To set this timer you will need to pull all pins up, and then push down the pins for the timeframe you want the device to be active. Then, rotate the timer’s dial clockwise until the pointer on the face of the dial points to the current time of day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted with a gray background. Lastly, set the master switch to “Timer On” position. If you have any further questions, we encourage you to respond or contact our Consumer Service through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
by|May 4, 2023
1 found this answer helpful
Q:I need the directions to Big Button Timer
by|Mar 9, 2016
1 Answer
Answer This Question
A: Hello TK, Great question. With this basic mechanical timer you will need to pull all pins up, and then push down the pins for the timeframe you want the device to be active. Then, rotate the timer’s dial clockwise until the pointer on the face of the dial points to the current time of day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted with a gray background. Lastly, set the master switch to “Timer On” position. Also, you can email us at support@jascoproducts.com, request a maunal and we email you the manual. If you have any further questions, please feel free to respond or contact us through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
by|May 3, 2023
2 found this answer helpful
Q:My timers do not keep the correct time. After 24 hours in the am the time on the timer is still saying pm. all 5 timers do this
by|Dec 20, 2015
1 Answer
Answer This Question
A: Dear Lu, this is very unusual. Here is our advise, with this basic mechanical timer you will need to pull all pins up, and then push down the pins for the timeframe you want the device to be active. Then, rotate the timer’s dial clockwise until the pointer on the face of the dial points to the current time of day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted with a gray background. Lastly, set the master switch to “Timer On” position. If you have any further questions, please feel free to respond or contact us through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
by|May 3, 2023
Q:How do I set my big button timer?
by|Dec 15, 2015
1 Answer
Answer This Question
A: Dear Wacky, With this basic mechanical timer you will need to pull all pins up, and then push down the pins for the timeframe you want the device to be active. Then, rotate the timer’s dial clockwise until the pointer on the face of the dial points to the current time of day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted with a gray background. Lastly, set the master switch to “Timer On” position. If you have any further questions, please feel free to respond or contact us through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
by|May 3, 2023
Q:can I get instruction sheet. can't find paper work.
GE 24 hour timer , model 15076
by|Nov 14, 2015
1 Answer
Answer This Question
A: Please contact our Customer Service team at Jasco Products Company. They will walk you through the installation process step-by-step. If you have any further questions, please feel free to respond or contact us through phone or email. Jasco Products Tech Support (Manufacturer)
by|May 3, 2023
Q:Does this timer cover up both outlets of a normal outlet box
by|Oct 13, 2015
2 Answers
Answer This Question
A: No, it fits well in just one side of a normal outlet.
by|May 3, 2023
A: If the timer is plugged into the bottom outlet on the outlet box, then it will not cover the top outlet. If you have any further questions, please feel free to respond or contact us through phone or email. Jasco Products Tech Support (Manufacturer)
by|May 3, 2023
1 found this answer helpful
Q:Do I push down or leave up for the hours I want the timer to turn on? how do I get instructions.
by|Sep 19, 2014
1 Answer
Answer This Question
A: You push the tabs up for the time that you want the lights to come on. You can obtain a copy of the manual on the Jasco website. Jasco Products Tech Suport(Manufacturer)