Questions and Answers for Flow Wall 36 in. H x 96 in. W Modular Garage Slat Wall Panel Set with Storage Hooks in Silver (14-Piece)

A:  Hi Paul. Panels are 12” x 48” can be configured anyway you choose.

A:  These panels can be mounted as high or low as the customer needs brackets . Generally 2 to 3’ from the finished floor.

A:  Hi There, There actually isn't any min/max mounting height for the panels...it's entirely dependent on your needs and your space! Some folks choose to run their panels all the way down to the floor, and others choose to start their panels at the lowest point where they plan to mount their cabinet, hooks, or other accessories. Totally up to you!

A:  Whatever height works for you. Mine is 2’ off the floor so I put shorter items low. Height is 7’, however I would mount higher except I have a hanging shelf unit above it. 

A:  As long as it is paint either primed or compatible with the base plastic material. Otherwise, you will have adhesion problems.

A:  Hi Daniel, we actually offer this with white panels, no spray paint needed! https://www.homedepot.com/p/Flow-Wall-36-in-H-x-96-in-W-Modular-Garage-Slat-Wall-Panel-Set-with-Storage-Hooks-in-White-14-Piece-FWS-4812-6WB11/204181019

A:  Panel is .75" thick.

A:  Panel is .75" thick.

A:  If you mount it flat on the wall it is about 1/2 inch thick.  A standard extender would work fine. HD part number  Model# BE1-2  Internet# 202708650  Store SKU# 169289 

A:  Panel is designed to work only with Flow Wall Hooks and accessories.

A:  Panel is designed to work only with Flow Wall Hooks and accessories.

A:  Yes. You can cut them to fit what ever area you need. I even cut out a hole in mine for a electrical switch. 

A:  Cutting the panels shorter in overall length is no problem. The end caps will fit fine no matter how short you cut the panel length down. Ripping the panel to narrower width will cause a problem with overall shiplap fit since the lap will be cut off. The panels will still work fine, just may not look consistent if you cut off either long side of the panel.

A:  Yes you can cut the panels in either direction. The install kit includes a frame you can apply so even cut edges look “finished”. 

A:  Panel is designed to be cut to any dimension.

A:  They can be easily cut and come with extra decorative ends.

A:  Heavy duty cellulose PVC panel holds up to 100 lbs. per square foot, shelves hold up to 55 lbs. each"

A:  From the website "Heavy duty cellulose PVC panel holds up to 100 lbs. per square foot, shelves hold up to 55 lbs. each"

A:  I've would recommend using the double hooks. Flow Wall makes then in either a 4" or 8" length. These hooks are also great for shovels and heavy garden tools. I would also look at their gravity hooks. They might be useful.

A:  I would suggest the Big Mouth Utility Hook (FSH-074-2). -The Flow Wall Team