Questions and Answers for Fasade Traditional Style #1 2 ft. x 4 ft. Glue-Up PVC Ceiling Tile in Gloss White

A:  Hello and thank you for your interest in our product. Yes, the Fasade J-trim can be used to border the edges on cut panels for any type of installation. Please feel free to contact our customer care team at 800.434.3750 for any further troubleshooting issues. Thank you!

A:  Hello and thank you for your interest in our product. Unfortunately at this time we do not make custom size panels. Please feel free to contact our customer care team at 800.434.3750 for further troubleshooting issues. Thank you!

A:  Hello and thank you for your interest in our product. The Traditional 2 2x4panel has a 12x12" square pattern, whereas the Traditional 1 18x24 panel has the 6" squares. I would suggest using the ceiling panels for the entire project, not only because they allow for the most coverage, but that way your panels are all matching. Please feel free to contact our customer care team at 800.434.3750 for any further questions. Thank you!

A:  Hello and thank you for your interest in our product. The surface to which you are installing the glue-up ceiling panels needs to be smooth, flat and free of any dirt or dust. You will need to remove the popcorn ceiling prior to installation. Please feel free to contact our customer care team at 800.434.3750 for any further questions or needed assistance. Thank you!

A:  Hello and thank you for your interest in our product. All of our panels are sold individually, judging by your square footage you would be looking at roughly 18 panels. According to the website each panel is $38.30. Please contact our customer care team at 800.434.3750 for further questions. Thank you!

A:  Thank you for your interest in our product. Our Fasade panels themselves can withstand up to 140 degrees Farenheit without any damage being caused. Any temperature above the 140 may cause for a chemical reaction with the adhesive on the panel possibly causing the tile to fail. Please feel free to contact our customer service department at 800.434.3750 for any further questions. Thank you.

A:  Hello and thank you for your interest in our product. This specific product is made from a PVC Thermal Plastic so no it will not rust. If using in your bathroom we do recommend using a clear silicone around the edges to seal off the tiles to prevent any moisture gathering behind the tiles. If you have further questions please feel free to contact our customer service department at 800.434.3750. Thank you.

A:  Hello! Yes, our Fasade panels are impervious to water but substrates like drywall or plywood are not. Be sure, that you properly prep(water proof) the substrate that is going to be behind the panels. The panels are virtually indestructible under normal use. We also recommend that the panels be cleaned with soap and water only. Any harsh abrasives will damage the finish on the tiles. Please feel free to contact customer care for any additional questions at 800.434.3750. We would be happy to assist you!

A:  Hello! Thank you for your question! Our Fasade panels Fire Performance: Class A ASTM E 84? Non-Foil finishes: Flame spread 10, smoke developed 140, to ASTM E84.? Foil-faced finishes: Flame spread 15, smoke developed 250, to ASTM E84. Please feel free to direct any further questions to our customer care department at 800.434.3750. We would be happy to assist you!

A:  Hello! Thank you for your question! To cut the backsplash panels, you can use a utility knife, scissors or a tin snips. To ensure professional looking results, the room layout should be balanced with panels centered in the room and equal size border panels used on opposite sides of the room. Please feel free to contact customer care for additional installation tips (800.434.3750). Thank you!