Questions and Answers for Fasade Traditional Style #2 2 ft. x 2 ft. Argent Bronze Vinyl Lay-In Ceiling Tile

A:  Thank you for your interest in our Fasade Traditional Style #2 Vinyl Lay-In Ceiling Tile in Crosshatch Silver. These are a lay-in ceiling tile, which are designed to be installed into a grid system. We do not recommend gluing them to a substrate. If you are are looking for a tile to glue up, you can use our Fasade 2' x 4' glue up panels in the same style and finish. If you have any additional questions please reach out to us at 800.434.3750. Thank you!

A:  Thank you for your interest in our Fasade Traditional Style #2 Vinyl Lay-In Ceiling Tile in Bermuda Bronze. Our Lay-In tiles are manufactured to lay into a grid system, we do not warranty or recommend them being installed as a direct apply tile. If you need a glue up tile, we have the same style and finish of this panel available in a 2' x 4' direct apply panel. Please feel free to visit the direct link below to see that option. https://www.homedepot.com/p/Fasade-Traditional-Style-2-ft-x-4-ft-Glue-Up-Vinyl-Ceiling-Tile-in-Bermuda-Bronze-G51-17/100671006. If you have any additional questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  Thank you for your interest in our Fasade Traditional Style #2 Polished Copper Vinyl Lay-In Ceiling Tiles. We do not recommend using our products for an outdoor application. Please feel free to reach out to our customer care team at 800.434.3750 with any additional questions you may have. Thanks again!

A:  We used it in our kitchen has a wall backsplash. 6 years later, it still looks great.

A:  Thank you for your interest in our Fasade Traditional Style #2 Vinyl Lay-In Ceiling Tile in Crosshatch Silver. These tiles are meant to be installed in a grid system. We do not recommend directly applying them to any substrate. Please feel free to contact our customer care team at 800.434.3750 to find a product better suited to your project needs, we have many similar styles and colors that would work for a direct apply application. Thank you!

A:  The actual dimensions of this product are Product Depth (in.) 23.75 Product Height (in.) 0.028 Product Width (in.) 23.75 Thickness (In.) 0.028

A:  Thank you for your interest in our Fasade Traditional Style #2 Smoked Pewter Vinyl Lay-In Ceiling Tiles. Our tiles measure just under a 2x2 panel, approximately 23.75" x 23.75", as a typical lay-in ceiling tile would measure. If you have any additional product specific questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  Thank you for your interest in our Traditional Style #2 Vinyl Lay-In Ceiling Tiles. Our panels are Class A Fire Rated and can withstand up to 140 degrees of heat as long as they are kept 6" from a direct heat source, such as a burner. However, we do not recommend installing our panels for an outdoor application, as they are not warrantied to withstand severe temperature swings or outdoor UV protected. These panels are designed to lay into a grid system, not be directly applied to a surface. If you have any additional product or installation questions please feel free to reach out to our customer care team at 800.434.3570. Thanks again!

A:  Thank you for your interest in our Traditional 2 Lay-In Ceiling Tile in Bermuda Bronze. These tiles are meant to be laid into a grid system. If you have additional installation questions or are looking for a direct apply tile please contact our customer care team at 800.434.3750. Thank you!

A:  Thank you for your interest in our Traditional Lay-In Ceiling Tile in Bermuda Bronze. If you are planning to install glue up tiles to your ceiling, you need to make sure your ceiling is clean. We recommend that you apply a fresh coat of primer or paint on the ceiling before the panels are installed. Also, be sure to clean the back of each panel with rubbing alcohol before applying adhesive. Acceptable substrates are drywall, plaster or clean, smooth tile (glazed, porcelain type tile; not porous or textured). Any damaged, loose or uneven areas must be repaired, patched, leveled and primed. Fill cracks and irregularities with wallboard compound or spackling, then sand smooth with fine-grade sandpaper. Any porous material like highly textured drywall, plywood (or any raw wood without primer), and wallpaper unless removed, sanded and primed, will result in adhesive failure. If you have any additional installation questions please contact our customer care team at 800.434.3750. Thank you!