Q:The picture shows 5/8” bore printed on the saw blade. The description says 20mm arbor.
What is the actual arbor measurement?
by|Aug 8, 2021
1 Answer
Answer This Question
A: The blade arbor is 20mm but comes with a 5/8 arbor reducer.
by|Aug 10, 2021
Q:What is the RPM rating of this blade?
by|May 29, 2021
1 Answer
Answer This Question
A: Dia. Ø: 7-1/4 inch
Max. Speed: 5800rpm
Arbor Ø: 25/32 inch
Kerf: 0.078 inch
Teeth: 40
by|Jun 3, 2021
Q:Will this blade fit the
RYOBI 18-Volt ONE+ Cordless 7-1/4 in. Miter Saw (Tool Only) with Blade and Blade Wrench
Model #P552?
by|Apr 24, 2019
1 Answer
Answer This Question
A: The RPM would need to be less than 4200 for the blade to work properly.
by|Sep 10, 2019
1 found this answer helpful
Q:do you make a blade for cutting aluminum that is at least 4 x 4 squre solid 6061t6, say a 10 inch dia. blade.
Thanks Marion Kaz
by|Jan 31, 2019
1 Answer
Answer This Question
A: Yes, this can be used for cutting aluminum as well.
by|Mar 6, 2019
Q:I buoght this blade for my dewalt 71/4 circular saw but the arbor was too bigger for my saw because my saw arbor is 5/8 big can you healp my wiht that
by|Jan 29, 2018
2 Answers
Answer This Question
A: Unfortunately this blade is sized for a metric arbor.
by|May 5, 2023
A: You may contact our product support specialist at 866 386 8665. They will help you get everything sorted out.
by|May 5, 2023
Q:Can it cut 1-1/2 in. x 1/8 in steel square tube? If so, what type of longevity can I expect from this blade (roughly speaking)
by|Nov 4, 2017
1 Answer
Answer This Question
A: When mounted on an Evolution saw, this blade is capable of the cut you describe. As a rough rule of thumb, one Evolution blade lasts as long a 20 abrasive discs.
by|May 5, 2023
Q:Well this cut lamanate counter top
by|Sep 12, 2017
1 Answer
Answer This Question
A: Evolution's multipurpose blade would be a better choice for a laminate counter top, you can see it here:
http://www.homedepot.com/p/Evolution-Power-Tools-RAGE-7-1-4-in-Multipurpose-Replacement-Blade-RAGEBLADE/203661804?keyword=rageblade
by|Nov 4, 2022
2 found this answer helpful
Q:Can I cut 1/4 inch steel plate with this blade? I need to cut about 9 feet of steel
by|Apr 19, 2017
1 Answer
Answer This Question
A: Yes, this blade will be able to cut 9 feet of 1/4" steel plate. Thanks for the question!