Questions and Answers for Everbilt 1/4 in. x 4 in. Zinc-Plated Eye Bolt with Nut

A:  This will not support 6000 pounds! The tension capacity is limited by the eye opening up. Based on A307 steel, it will begin to yield around 270 pounds. A reasonable working limit might be around 180 pounds or 80 kilograms.

A:  I'm not sure, but the supplier said over "2721.6 kilograms." which is nearly 6,000 pounds. these may be strong, but I don't think they're that strong.

A:  The working load limit for the 3/8 in. x 5 in. Zinc-Plated Eye Bolt with Nut is 2721.6 kilograms. This product should not be used for overhead lifting, or to support of human weight, athletic or playground equipment.

A:  The length of the threading is 2.99 inches.

A:  The thread length is 2.992 inches.

A:  Currently we do not carry a multi-pack for this Eye Bolt with Nut.

A:  No, single item only.

A:  The 4” length is from the top of the eye to the bottom of the bolt. The threaded portion is 2-3/8” long.

A:  Length if from outboard end of eye to the end of threads.

A:  For this Eye Bolt with Nut, the inner dimension of the eye is ~ .574 in. , the outside dimension is ~ .925 in.

A:  If you need to place a large order, you can order the product online or as a special order through the ProDesk at your local Home Depot.

A:  The working load limit for this Eye Bolt with Nut is 80 lbs.

A:  The maximum weight this can hold is 2721.6 kilograms.

A:  No, this bolt is not fully threaded.