Questions and Answers for Everbilt 2.68 in. Heavy-Duty Brushed Nickel Closet Rod Pole Sockets (2-Pack)

A:  Tubular height & width is 1.3 In., so a 1" diameter will work. ML

A:  That is what it is designed for, so yes

A:  2.1 cm(0.826" ML

A:  2.1 cm(0.826" ML

A:  I think 1 5/8 or 1 1/2.

A:  1"

A:  1" ML

A:  1-5/16 in. ML

A:  I'm sorry, no. ML

A:  Yes, it will maximize the loaded closet rod capacity. If a stud is not available in the specific location you are installing. You might consider installing a horizontal 2x4 board that is installed into the studs within the space. B.B.

A:  It wouldn't hurt, but if you don't have a stud conveniently located where you need it ...and let's face it - it's not - you can use drywall anchors like I did and it should hold it in place with no problem. We have a lot of heavy jackets and jeans on it and it holds up very well. Like these: https://www.homedepot.com/p/Everbilt-8-10-x-1-in-White-Ribbed-Plastic-Anchor-with-Pan-Head-Combo-Drive-Screw-10-Piece-803812/204273413

A:  No, but it’s best cause the weight you going to put on the pole. You can use Anchors with the Screws if you don’t have studs.

A:  No, this is not for adjustable poles.

A:  Yes

A:  This socket will fit poles with a diameter of 1-5/16 in.