Questions and Answers for Ekena Millwork 1 in. x 60 in. x 6 in. Primed Polyurethane Crosshead Casing Moulding

A:  Thanks for reaching out. Sure! This could be used as a window sill. As it is typically installed over window and doors (thus the top is not seen) it is recommended that you put aluminum flashing on the top so water does not sit there. This crosshead has a bottom projection of 1 inch and a top projection of 2-3/4 inches. For the install guide, feel free to visit: https://images.homedepot-static.com/catalog/pdfImages/74/74e1f484-fbf7-4324-9c14-cec5e69f7ff7.pdf

A:  Yes, this product is available in a 55". The Model # is CRH06X55. Using The Home Depot search bar, you can type that in. Let us know if we can further assist with your project!

A:  Howdy Newbie, The only way I can think of would be to purchase one more and then cut the end of each on till you get the exact length you need. Then I would glue and screw the two pieces together. Finally, when the glue is completely dry, just sand and repaint. happy building, Coach Dave

A:  Thank you for your question. The top of this crosshead projects 2- ¾ inches.

A:  No, 1'' is at the bottom and 2 3/4'' at the top.

A:  The 48" measurement is the bottom width. The top width measurement is 51 1/2".

A:  This is paintable.

A:  The Primed Polyurethane Crosshead Casing Moulding product with is 60'' wide.

A:  Dear Valued HomeDepot Customer, We reached out to the MFG for more information and below is their response. Correct, the bottom width would be 60”