#1 Home Improvement Retailer

Questions and Answers for Ekena Millwork 1 in. x 108 in. x 6 in. Polyurethane Crosshead Moulding with Flat Keystone

Internet #205731688

Model #CRH06X108KF

Store SKU #1001232039

Questions & Answers

5Questions
caret
Q:Can this be installed outdoors?
by|Feb 29, 2024
0 Answer
Answer This Question
caret
Q:What is the bottom length
by|Dec 18, 2021
1 Answer
Answer This Question

A:  Thank you for your interest in our products! The 'Product Length' represents the bottom length of the crosshead. If the Product Length says 86 in., then the bottom most part of the crosshead will be 86 in. from one end to the other. The top width would be approximately 3.5 in. wider than the bottom width. Using the same 86 in. example, that would make it's top width 89.5 in. If you are ever unsure which number represents which width, refer to the 'Product Overview' section of the product page. There should be a bullet point that specifies the bottom and top widths. Best of luck on your project!

by|Dec 23, 2021
    caret
    Q:Will it be flush to the house or would I need to remove the siding underneath to make it flush?
    by|Aug 12, 2020
    1 Answer
    Answer This Question

    A:  Sure! This can be installed on top of vinyl siding. Since the crosshead is flat on the back and installs flush, there may be gaps on the sides (depending on your type of vinyl siding). You can either fill these gaps or remove the siding to install the siding. The crosshead, itself, easily installs with construction adhesive and screws/nails. For the install guide, feel free to visit: https://images.homedepot-static.com/catalog/pdfImages/74/74e1f484-fbf7-4324-9c14-cec5e69f7ff7.pdf

    by|Aug 13, 2020
      caret
      Q:is the keystone removable?
      by|Jun 8, 2019
      1 Answer
      Answer This Question

      A:  Thanks for reaching out and your interest in our products! The keystone on this particular crosshead, is not removable. However, there is an easy solution! We offer the option to purchase the crosshead and keystone, separately. The Crosshead Model # is CRH06X62. The Keystone Model # is KEY06X07X04RI. Use The Home Depot search bar to type those in, and they will pop right up! Thanks again, and please let us know if we can assist additionally at all.

      by|Jun 11, 2019
        caret
        Q:Is the 52" width measured end-to-end from the top moulding corners or from the vertical edges of bottom member?
        by|Feb 18, 2017
        1 Answer
        Answer This Question

        A:  Yes, the overall measurements are from end to end at the widest part.

        by|May 4, 2023